Loading ...
Loading ...
Loading ...
Synchronizing the universal remote control with
the system:
1. Park the vehicle within range of the remote-
controlled system.
2. Program the relevant button on the interior
mirror as described.
3. Locate and press the synchronizing button
on the system being programmed. You have
approx. 30 seconds for the next step.
4. Hold down the programmed button on the in‐
terior mirror for approximately 3 seconds and
then release it. If necessary, repeat this step
up to three times in order to finish synchroni‐
zation. Once synchronization is complete, the
programmed function will be carried out.
Reprogramming individual
buttons
1.
Switch on standby state.
2. Press and hold the interior mirror button to be
programmed.
3. As soon as the interior mirror LED starts
flashing slowly, hold the hand-held transmit‐
ter for the system to be controlled approx. 1
to 3 in/2.5 to 8 cm away from the buttons of
the interior mirror. The required distance de‐
pends on the hand-held transmitter.
4. Likewise, press and hold the button of the
desired function on the hand-held transmit‐
ter.
5. Release both buttons as soon as the interior
mirror LED flashes more rapidly or lights up
continuously. The LED flashing more rapidly
or being continuously lit up indicates that the
button on the interior mirror has been pro‐
grammed. The system can then be controlled
by the button on the interior mirror.
If the LED does not flash faster after at most
60 seconds, change the distance and repeat
the programming starting with step 4. Several
more attempts at different distances may be
necessary. Wait at least 15 seconds between
attempts.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the in‐
terior mirror button and repeatedly press and
release the hand-held transmitter button for
2 seconds.
Operation
WARNING
Body parts can be jammed when operating re‐
mote-controlled systems, such as the garage
door, using the integrated Universal Remote
Control. There is a risk of injury or risk of dam‐
age to property. Make sure that the area of
movement of the respective system is clear
during programming and operation. Also follow
the safety information of the hand-held trans‐
mitter.
The system, such as the garage door, can be op‐
erated using the button on the interior mirror
while the drive-ready or standby state is
switched on. To do this, hold down the button
within receiving range of the system until the
function is activated. The interior mirror LED
stays lit while the wireless signal is being trans‐
mitted.
Deleting stored functions
Press and hold the two outer buttons on the in‐
terior mirror simultaneously for approximately
10 seconds until the LED on the interior mirror
flashes green rapidly. All stored functions will be
deleted. The functions cannot be deleted individ‐
ually.
Sun visor
Glare shield
Fold the sun visor down or up.
Seite 255
Interior equipment
CONTROLS
255
Online Edition for Part no. 01402722630 - VI/18
Loading ...
Loading ...
Loading ...