Loading ...
Loading ...
Loading ...
Tow fitting
General information
The screw-in tow fitting should always be car‐
ried in the vehicle.
The tow fitting can be screwed in at the front
or rear of the vehicle.
The tow fitting is found in the onboard vehicle
tool kit, refer to page 307.
▷ Use only the tow fitting provided with the
vehicle and screw it all the way in.
▷ Use the tow fitting for towing on paved
roads only.
▷ Avoid lateral loading of the tow fitting, for
instance do not lift the vehicle by the tow
fitting.
Safety information
NOTE
If the tow fitting is not used as intended,
there may be damage to the vehicle or to the
tow fitting. There is a risk of damage to prop‐
erty. Follow the notes on using the tow fit‐
ting.◀
Screw thread for tow fitting
Press on the mark on the edge of the cover to
push it out.
For covers which have an opening instead of a
marking, pull the cover out by the opening.
Tow-starting
Do not tow-start the vehicle.
Start the engine by jump-starting, refer to
page 318, if possible.
Have the reasons for the starting difficulties
corrected by a dealer’s service center or an‐
other qualified service center or repair shop.
Seite 321
Breakdown assistance Mobility
321
Online Edition for Part no. 01402984955 - X/17
Loading ...
Loading ...
Loading ...