Loading ...
Loading ...
Loading ...
4. Insert the connector into the power socket
inside the vehicle.
5. With standby state switched on or the en‐
gine running, switch on the compressor.
If a tire inflation pressure of at least 2 bar
cannot be reached, contact your dealer’s
service center or another qualified service
center or repair shop.
If a tire inflation pressure of at least 2 bar is
reached, see Minimum tire inflation pres‐
sure is reached.
6. Unscrew the connection hose of the com‐
pressor from the tire valve.
7. Pull the connector out of the power socket
inside the vehicle.
8. Stow the Mobility System in the vehicle.
Minimum tire inflation pressure is
reached
1.
Unscrew the connection hose of the com‐
pressor from the tire valve.
2. Pull the connector out of the power socket
inside the vehicle.
3. Stow the Mobility System in the vehicle.
4. Immediately drive approx. 5 miles/10 km to
ensure that the sealant is evenly distrib‐
uted in the tire.
Do not exceed a speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than
12 mph/20 km/h.
Adjustment
1. Stop at a suitable location.
2. Screw the connection hose of the com‐
pressor directly onto the tire valve stem.
3. Insert the connector into the power socket
inside the vehicle.
4. Correct the tire inflation pressure to at
least 2.0 bar.
▷ Increase tire inflation pressure: with
standby state switched on or the en‐
gine running, switch on the compres‐
sor.
▷ Reduce tire inflation pressure: press
the button on the compressor.
5. Unscrew the connection hose of the com‐
pressor from the tire valve.
6. Pull the connector out of the power socket
inside the vehicle.
7. Stow the Mobility System in the vehicle.
Continuing the trip
Do not exceed the maximum permissible
speed of 50 mph/80 km/h.
Reinitialize the run-flat tires, refer to page 288.
Seite 280
Mobility Wheels and tires
280
Online Edition for Part no. 01402984955 - X/17
Loading ...
Loading ...
Loading ...