Loading ...
Loading ...
Loading ...
Establishing idle state when opening
the front doors
Via iDrive:
1. "My Vehicle"
2. "Vehicle settings"
3. "Doors/Key"
4. "Turn off after door opening"
Manual idle state
To establish idle state in the vehicle after end
of trip:
Hold button down until the OFF
indicator on the instrument clus‐
ter goes out.
Standby state
Concept
When standby state is switched on, most func‐
tions can be used while the vehicle is station‐
ary. Desired settings can be adjusted.
General information
The vehicle is in the standby state after the
front doors are opened from the outside.
Display in the instrument cluster
OFF is displayed in the instru‐
ment cluster. The drivetrain is
switched off and standby state
switched on.
Drive-ready state
Concept
Switching on drive-ready state corresponds to
starting the engine.
General information
Some functions, such as DSC Dynamic Stabil‐
ity Control, can only be used with drive-ready
state switched on.
Follow further information on the drive-ready
state, refer to page 99.
Switching on drive-ready state
Drive-ready state is switched on
via the Start/Stop button:
1.
Depress the brake pedal.
2. Press the Start/Stop button.
Display in the instrument cluster
When drive-ready state is switched on, the
tachometer shows the current engine speed.
Switching off drive-ready state
Press the Start/Stop button to switch off drive-
ready state. The vehicle switches into standby
state.
Seite 22
At a glance Idle state, standby state, and drive-ready state
22
Online Edition for Part no. 01402984955 - X/17
Loading ...
Loading ...
Loading ...