Loading ...
Loading ...
Loading ...
27
REMOVING AND CLEANING THE WIRE GUIDES
Only use conventional cleaners to clean the guides.
After cleaning, re-tighten the screws on the guides with a
screwdriver
When replacing the wire guides, make sure you mount them
on the same side they were installed on prior to removal.
1
Undo the screw. Use a screwdriver.
2
Remove the guides from the holes in the back wall.
Take care not to lose the spacers fi tted on the wire
guides. Replace the spacers after cleaning; otherwise,
sparks may appear.
Loading ...
Loading ...
Loading ...