Loading ...
Loading ...
Loading ...
The essentials
●
Sc
r
ew the c
ompressor tyre inflator into the
valve.
●
Repeat the inflation process.
●
If the indicated pressure still cannot be
reached, the tyre is too badly damaged. Stop
and request assistance from an authorised
technician.
●
Disconnect the air compressor. Unscrew
the tyre inflator tube from the tyre valve.
●
When the tyre pressure is between 2.5 and
2.0 bars, continue driving without exceeding
80 km/h (50 mph).
●
Check the pressure again after 10 minutes
›››
page 86.
››› in TMS (Tyre Mobility System)* on
page 85
››› page 85
Changing a wheel
V
ehic
l
e tool kit
Fig. 65 See Fig. for positioning 2
Adapter for anti-theft bolt
T
o
w
ing eye, removable
Box spanner for wheel bolts
Crank handle for jack
Jack
Screwdriver with hexagon socket in the
handle
Hook for pulling off wheel trims or wheel
bolt caps.
››› in Location on page 82
››› page 82
1
2
3
4
5
6
7
Full hubcaps*
Fig. 66 Removing the full hubcap
Removing the full hubcap
●
Take the wheel brace and the wire hook
fr
om the
v
ehicle tool kit ›››
page 82.
●
Hook the wire through one of the grooves
on the hubcap.
●
Insert the wheel brace onto the wire hook
››› Fig. 66 and pull the hub cap in the direc-
tion shown by the arrow.
Fitting hubcaps
Before mounting the full trim, the anti-theft
wheel lock must be threaded into position
›››
Fig. 69
2
or
3
. Otherwise it will not be
po
s
s
ible to mount the full hubcap.
●
Press the trim against the wheel so that the
space for the valve fits over the tyre valve
››› Fig. 69
1
. Make sure that the hubcap is
c
orr
ectly
fitted all the way around the wheel.
45
Loading ...
Loading ...
Loading ...