Loading ...
Loading ...
Loading ...
Checking and refilling levels
●
B
ef
or
e opening the bonnet, make sure that
the windscreen wiper arms are in place
against the windscreen ›››
.
●
Open the driver door.
●
Pull the release lever ›
›
›
Fig. 239 in the di-
rection of the arrow. The bonnet is released
from the lock carrier by a spring mechanism
›››
.
●
Lift the bonnet using the release lever
›
›
›
Fig. 240 (arrow) and open the bonnet fully.
The bonnet is held open thanks to the gas
strut.
Closing the bonnet
●
To close the bonnet, pull it down to over-
come the gas strut pressure ›››
.
●
Allow the bonnet to fall into the lock carrier.
Do not
pr
e
ss down.
If the bonnet is not correctly closed, open it
once again and close it correctly.
The bonnet is correctly closed when it is flush
with the corresponding parts on the body-
work.
WARNING
If the bonnet is not correctly closed, it could
sudden
ly open while driving leaving the driv-
er without visibility. This could result in a se-
rious accident.
●
After closing the bonnet, always check that
it is properly secured by the locking mecha-
nism in the lock carrier. The bonnet must be
flush with the s
urrounding body panels.
●
While driving, if you notice that the bonnet
is not correctly closed then stop immediately
and close it correctly.
●
Only open and close the bonnet when there
is nobody within its range.
CAUTION
●
T
o avoid d
amage to the bonnet and to the
windscreen wiper arms, only open it when
the windscreen wipers are in place against
the windscreen.
●
Before driving, always lower the wiper
arms.
Checking fluid levels
Fig. 241 Diagram for the location of the vari-
ou
s
el
ements.
From time to time, the levels of the different
fluid
s
in the
vehicle must be checked. Never
fill with incorrect fluids, otherwise serious
damage to the engine may be caused.
Coolant fluid deposit
Engine oil dipstick
Oil filler neck
Brake fluid reservoir
Vehicle battery (underneath a cover)
Windscreen washer fluid reservoir
»
1
2
3
4
5
6
275
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...