Loading ...
Loading ...
Loading ...
The essentials
below ›
›› Fig. 3
(arr
ow) then remove the cover
upwards.
●
Insert the key shaft into the lock cylinder to
unlock or lock the vehicle.
Special Characteristics
●
The anti-theft alarm will remain active when
vehicles are unlocked. However, it is not trig-
gered ›››
page 114.
●
If the driver door is opened, the alarm will
be triggered.
●
Switch the ignition on. The electronic im-
mobilizer recognises a valid vehicle key and
deactivates the anti-theft alarm system.
››› in Introduction on page 90
Note
The anti-theft alarm is not activated when the
vehicl
e is locked manually using the key
shaft ›››
page 114.
Locking the passenger side door and
s
lidin
g door
s manually
Fig. 4 At the front of the passenger sliding
door: Emer
g
ency
lock, hidden by a rubber
cap.
Fig. 5 Emergency locking of the vehicle using
the
v
ehic
le key
The passenger side door and the sliding
door
s
c
an be locked manually. The anti-theft
alarm is not activated in this case.
●
Open the door.
●
Remove the rubber cap to the front of the
door. The rubber cap is marked with a lock
symbol ››› Fig. 4.
●
Unfold the vehicle key shaft
›››
page 112.
●
Insert the key shaft horizontally into the
opening and moved the coloured lever for-
ward ››› Fig. 5.
●
Replace the rubber cap and close the door.
●
Check if the door is locked.
●
Carry out the same operation on the other
doors if necessary.
●
Have the vehicle checked by a specialised
workshop.
››› in Introduction on page 90
Note
The doors can be opened and unlocked indi-
vidual
ly from the inside by pulling the inside
door handle. To open, pull the inner door re-
lease lever twice ›››
page 114.
9
Loading ...
Loading ...
Loading ...