Loading ...
Loading ...
Loading ...
Operation
Automatic off
●
The lumbar massage will disconnect auto-
m
atic
al
ly after approx. 10 minutes.
Seat with position memory*
Fig. 158 Memory buttons on the outside of
the driv
er se
at
Memory buttons
Indiv
idual
settin
gs for the driver seat and the
exterior mirror can be assigned to each mem-
ory button.
Storing exterior mirror settings for driving
forwards
●
Connect the automatic parking brake.
●
Move the gear lever to neutral.
●
Switch the ignition on.
●
Adjust the front seat and the exterior mir-
rors.
●
Keep the
SET
button held down for more
th
an one sec
ond ›
›› Fig. 158.
●
Press the required memory button for the
following 10 seconds. An audible warning
confirms the settings have been stored.
Storing front passenger exterior mirror set-
tings for driving in reverse gear
●
Connect the automatic parking brake.
●
Move the gear lever to neutral.
●
Switch the ignition on.
●
Press the required memory button.
●
Select reverse gear.
●
Adjust the front passenger side exterior
mirror so that you can see, for example, the
kerb area.
●
The new position of the mirror will be stor-
ed automatically and allocated to the vehicle
key that was used to unlock the vehicle.
Activating exterior mirror settings
●
With the driver door open and the ignition
turned off, push the memory button of the
corresponding door briefly.
●
OR: with the ignition switched on, hold in
the corresponding memory button until the
memorised position is reached.
To activate the memory function of the vehi-
cle key
Important: a position must be memorised in
the memory.
●
Open the driver-side door.
●
Press and hold any memory button.
●
Within the following three seconds, push
the button
to open the vehicle on the vehi-
c
l
e k
ey. An audible warning confirms the set-
tings have been activated.
Adjusting the wing mirrors for driving and
assigning driver seat settings to a vehicle
key
●
Activate the memory function of the vehicle
key
●
Adjust the front seat and the exterior mir-
rors.
●
Lock the vehicle. The settings are assigned
to the vehicle key.
To deactivate the memory function of the ve-
hicle key
Important: a position must be memorised in
the memory.
●
Press and hold the
SET
button.
●
Within the following 10 seconds, push the
open b
utt
on
on the vehicle key. An audi-
b
l
e w
arning confirms the settings have been
deactivated.
148
Loading ...
Loading ...
Loading ...