Loading ...
Loading ...
Loading ...
Transport and practical equipment
Note
The ventilating slits between the heated rear
window and the shelf
must not be covered so
that used air can escape from the vehicle.
Folding down rear seats to create load
spac
e
Fig. 163 Second row of seats: folding the rear
se
at
A
, rear seat as load space B.
Fig. 164 Third row of seats: fold down the
r
e
ar se
at to load A then return to position B
Each rear seat can fold down individually to
e
xt
end the lug
gage compartment.
Folding the seats in the second row of seats
for loading
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
If required, remove the head restraints from
the integrated seats for children and refit
them ››› page 78.
●
If necessary, raise the armrests.
●
Remove objects from the footwell in front of
and behind the rear seat ›››
.
●
Move the rear seat all the way back.
●
Push the head restraint down as far as it
w
i
l
l go ››› page 57.
●
In the middle seat, close the drinks carrier
in the rear of the centre console, if necessary.
●
Pull lever ››› Fig. 163
1
back and fold the
se
at
b
ackrest forwards. The complete rear
seat folds forward ›››
.
●
Fold the seat backrest forwards until it
loc
k
s
into the load surface position
››› Fig. 163 B.
●
If necessary, pull on the lever ››› Fig. 164
2
to move the seat to the required position.
●
When the seat is folded down, no adults or
c
hi
l
dren should travel in it ›››
.
F
o
l
ding the seats in the third row of seats for
loading
●
If necessary, open the belt loop and wind
up the seat belt by hand.
●
Open the rear lid.
●
Push the head restraint down as far as it
wil
l go ››› page 57.
»
155
Technical dataAdviceOperationEmergenciesSafety
Loading ...
Loading ...
Loading ...