Loading ...
Loading ...
Loading ...
English 29
Operations
Descale
Clean inside the steam generator to prevent affecting the food quality and taste.
NOTE
The oven counts the time of steam assisted modes and noties you to run the
Descale function when required. You can still use the steam assisted modes for
the next two hours without running the Descale function. However, you cannot
use the steam assisted modes after two hours unless you run and complete
the Descale function.
When you get the notication message, select Start now, and then press the
Dial Knob to run the Descale function, or select Later, and then press the Dial
Knob to postpone it.
1. Touch the button on the control panel.
2. Select Cleaning, and then press the Dial Knob.
3. Select Descale, and then press the Dial Knob.
4. Select Next, and then press the Dial Knob.
5. Follow the instruction on the screen, select Start, and then press the Dial
Knob.
If you get a notication message that you have insufcient water, add
more water in the water reservoir, select OK, and then press the Dial
Knob.
6. When descaling is complete, the oven drains water automatically.
7. Once draining is complete, empty the water reservoir.
8. Rell the water reservoir with 500 ml of drinkable water as instructed on the
screen, select OK, and then press the Dial Knob to start rinsing.
9. When rinsing is complete, empty the water reservoir.
After emptying the reservoir, clean it before putting it back to the oven.
WARNING
Wear oven gloves when you handle the water reservoir.
Use only descaling agents that are specic to steam ovens or coffee machines.
Steam Clean
This is useful for cleaning light soiling with steam.
This automatic function saves you time by removing the need for regular manual
cleaning.
1. Touch the button on the control panel.
2. Select Cleaning, and then press the Dial Knob.
3. Select Steam Clean, and then press the Dial Knob.
4. Follow the instruction on the screen, select Next, and then press the Dial Knob.
5. Select START, and then press the Dial Knob.
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause burns.
NOTE
If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soil manually using a cleaning agent
before activating Steam cleaning.
Leave the oven door ajar when the cycle is complete. This is to allow the
interior enamel surface to dry thoroughly.
While the oven is hot inside, auto cleaning is not activated. Wait until the oven
cools down and try again.
Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overows to the front.
NV75T8879RK_EU_DG68-01258C-00_EN.indd 29 2020-02-26  11:44:50
Loading ...
Loading ...
Loading ...