Loading ...
Loading ...
Loading ...
Occasional
clicking or light
cracking sound
Problem Possible Reason Solution
Float valve
does not rise
Food debris on float valve or
surrounding area
Remove float valve from lid, clean float valve,
silicone cap, and surrounding area on lid
Replace the float valve
Float valve silicone cap worn out
Too little liquid in inner pot
Add requisite minimum 1½ cups
(375mL / 12oz) of a thin liquid to inner pot
Open and close the lid completely
Ensure detachable power cord is plugged
tightly into base power socket. Try the
cooker on other outlets
Contact the Customer Care Team
This is normal. The clicking sound is the result
of the power relay working
Wipe bottom side of inner pot before placing
on element
Float valve obstructed by
lid-locking mechanism
Ensure inner pot is flush with heating
element; perform “Initial Test Run” to check
for function; contact the Customer Care
Team
No heat in the inner pot / Inner pot
base may be damaged
Bad power connection or
no power
Cooker’s electrical fuse has blown
Expanding pressure board under
changing temperatures
Bottom of inner pot is wet
No power to unit
Minor steam
leaking/hissing
from steam
release valve
during Cook cycle
This is normal
Regulating excess pressure Cook
cycle
On-Screen
Self-Diagnostic
Make sure the lid is closed properly. Do not
use the lid during the Sauté Smart Program
The word “Lid” is displayed
because lid is not used properly
The word “PrSE” is displayed
because of excess pressure
The words “Food burn” is
displayed because food is burnt
The word “noPr” is displayed
because there is not enough
pressure
Stir food to avoid burning and add water
as necessary
Add a minimum 1½ cups (375 mL / 12oz) of a
thin liquid to the inner pot
35
Press the Cancel key and allow the cooker to
cool for 60 minutes. Contact the Customer
Care Team if pressure is not fully released
The word "Alt" is displayed
because the target temperature
on Canning was not reached, or
the altitude setting is incorrect.
Press the Cancel key. Confirm your current
altitude and input the correct values on the
cooker. Restart cooking
Troubleshooting
Loading ...
Loading ...
Loading ...