Loading ...
Loading ...
Loading ...
ENGLISH
25
MAINTENANCE
MAINTENANCE
Regular Cleaning
Before Cleaning the Robot Cleaner
• Turn off the main power switch before cleaning
the robot cleaner.
• In order to maintain the optimum suction power
of the robot cleaner, the dust bin, filters, and
brush should be cleaned at least once a month.
• If the dust bin is completely full of dust or the
filters are clogged, the suction power may be
reduced.
• If the brush contains foreign substances, the
brush may not spin or a noise may occur during
operation.
• The filters will eventually need to be replaced.
To purchase replacement filters, call an LG
Electronics Customer Information Center or visit
www.lg.com
CAUTION
• Be sure to install the filter on the dust bin. If
the filter is not installed, the dust will get into
the motor inside the robot cleaner and will
cause damage to the suction motor.
Cleaning the Dust Bin
1
Press the top cover release (PUSH) button
a to open the top cover, and pull the dust bin
upward.
2
Press the dust bin release (PUSH) button b
to open the dust bin cover and empty the dust
bin.
3
Remove any foreign substances on the rubber
at the bottom of the dust bin.
4
Use a dry cloth to rotate the end of the
cyclonic mesh filter c to the unlocked position
l and remove the filter.
Loading ...
Loading ...
Loading ...