Loading ...
Loading ...
Loading ...
37
Setting Your Preferences
Audio control
Adjusting oven temperature
The Audio Control feature allows the oven
control to be operated without or with sounds
whenever necessary. If desired the control can be
programmed for silent operation and later returned
to operating with all the default sounds and chimes.
The volume of the chimes can also be adjusted.
To change the audio mode or audio
volume:
1. Press USER PREF until you get to the AUd
menu page.
2. Press
+
hi
or
-
lo
to toggle between the available
volume settings. AUd 5 for the highest volume
setting to AUd 1 for the lowest volume. AUd OFF
to disable the chimes.
3. Press START
to accept the changes and go
back to user preferences menu display.
The temperature in the oven has been pre-set at
thefactory.Whenrstusingtheoven,besureto
follow recipe times and temperatures. If you think
the oven is too hot or too cool, the temperature in
the oven can be adjusted. Before adjusting, test a
recipe by using a temperature setting that is higher
or lower than the recommended temperature. The
baking results should help you to decide how much
of an adjustment is needed. Each oven can be
individually adjusted.
Do not use oven thermometers such as those
found in grocery stores to check the temperature
settings inside the oven. These thermometers may
display temperatures that vary greatly from the
actual temperature.
To adjust the oven temperature:
1. Press USER PREFERENCES until you get
to the UPO menu page.
2. To select the oven you want to adjust, press
USER PREFERENCES
again to toggle
between the upper and the lower display.
3. Enter the temperature by pressing the
+
hi
or
-
lo
pads. The temperature can only be adjusted by
± 35°F.
4. Press START
to accept the changes and
go back to user preferences menu display.
The oven control can be programmed to display
time of day in 12 hours or 24 hours mode. The
oven has been preset at the factory to display in 12
hours mode.
Changing between 12 or 24 hour time of
day display:
1. Press USER PREF until you get to the
CLO 12hr menu page.
2 Press
-
lo
or
+
hi
to toggle the display of the clock
in 12 or 24 hours.
3. Press START
to accept the changes and
go back to user preferences menu display.
4. Remember to set your clock after changing the
time of day display mode.
The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The
oven has been preset at the factory to display in
Fahrenheit.
To change display from Fahrenheit to
Celsius or Celsius to Fahrenheit:
1. Press USER PREF until you get to the F-C
F menu page.
2. Press
+
hi
or
-
lo
to toggle between the °C and °F
display options.
3. Press START
to accept the changes and go
back to user preferences menu display.
Setting time of day display -
12 or 24 hours
Setting temperature display -
Fahrenheit or Celsius
Loading ...
Loading ...
Loading ...