Loading ...
Loading ...
Loading ...
21
To remove - Make sure the baking rack is in the
closed position. Using one hand, reach through
handle opening and grasp both the upper and
lower portions of the glide rack as shown in
Figure 1.
Using both hands, lift up the front of the rack
slightly and continue to pull the rack away from
the oven (Figure 2). Be sure to grasp both upper
and lower rack portions together when removing or
handling the glide rack.
The rack portions move independently and should
be held together when removing and replacing.
Full extendable
Luxury-Glide
TM
oven
rack
Glide rack
The glide rack is an extendable rack that makes food
preparation easier. It has glide tracks that allow the
rack to be pulled away from the oven without rubbing
the sides of the oven wall.
It is recommended to remove all racks from the
oven during self-clean cycles, but porcelain racks
may be left in the oven if they are soiled. After a
self-clean cycle, or anytime the gliding is rough,
the glide racks should be treated with graphite
lubrication. For instructions on how to care for
your oven racks, see “Caring for Your Porcelain
Enameled Glide Racks” in the Care and Cleaning
section.
Before Setting the Oven Controls
• Protective liners - Do not use aluminum foil
to line the oven bottom. Only use aluminum
foil as recommended in this manual. Improper
installation of these liners may result in risk of
electric shock or fire.
• It is recommended to remove all racks
from the oven during a self-clean cycle, but
porcelain racks may be left in the oven if they
are soiled. For care of oven racks, see the
Care and Cleaning section.
• Be sure to remove all oven accessories before
starting a self clean cycle.
Always use pot holders or oven mitts when using
the oven. When cooking, the oven interior and
exterior, as well as the oven racks, will become
very hot which can cause burns.
Figure 3 - Use two hands when handling the glide rack
Figure 1 - Hold both upper and lower rack portions
Figure 2 - Pull the rack away from the oven
Removing and replacing the Luxury-
Glide
TM
oven racks
To replace - Make sure the baking rack is in
the closed position. Grasp both upper and lower
portions of glide rack. Lift and hold the rack level
between the oven cavity walls. Tilt the front of the
rack upward slightly and slide the rack completely
into position.
Loading ...
Loading ...
Loading ...