Loading ...
Loading ...
Loading ...
36
Setting Your Preferences
User preferences
TheUserPreferencesmenuincludesalluserdened
options. This feature enables you to control the various
options of the electronic controls. This menu features
the Time of Day, Celsius or Fahrenheit display mode,
Continuous Bake or 12 Hour Energy Saving modes,
Clock display or No-Clock display, 12 Hours Time
of Day or 24 Hours Time of Day, Audio Control, and
Adjusting the oven temperature. The User Preferences
menu is only available when the oven is not being
used (not cooking).
To browse through the User
Preferences menu:
1. Press USER PREF to bring up the User
Preferences menu.
2. Press USER PREF
again to browse
through the menu pages.
3. Press
+
hi
or
-
lo
to toggle between the available
options.
4. Press START
while the chosen option is
on display to change.
5. Press CANCEL
whennishedtogetback
to the standard oven display.
User Preferences menu items:
• CLO 12:00; Setting the clock.
• CLO on; Clock on/off.
• CLO 12hr; 12/24 hour time of day display.
•
UPO; Adjusting oven temperature.
• F-C F ; Fahrenheit / Celcius display.
• AUd ; Audio on/off and volume.
• E S on ; 12 hour Energy Saving on/off.
• rSt ; Reset to default factory settings.
Setting the clock - time of day
Setting clock display- on or off
The clock may be set for 12 or 24 hour time of day
operation (see advanced settings section). The
clock has been preset at the factory for the 12 hour
operation.Whentherangeisrstpluggedin,orwhen
the power supply to the range has been interrupted,
the display will show “CLO 12:00”. The clock must
be set before the oven can be used.
When power to the unit has been interrupted, “12:00”
appearsandashesinthedisplay.TosettheClock
in this case, skip step 1 in the example below and
follow steps 2 and 3.
To set the clock (example for 1:30):
1. Press USER PREF until you get to the CLO
12:00 menu page.
2. Press
1
3
0
pads to set the time of day to
1:30. The pads
+
hi
or
-
lo
can also be pressed to
raise or lower the actual time displayed.
3. Press START
to accept the changes and go
back to user preferences menu display.
The oven control can be programmed to display
the time of day or not. The oven has been preset at
the factory to display the time of day.
Changing clock display between ON
and OFF:
1. Press USER PREF until you get to the
CLO on menu page.
2. Press
-
lo
or
+
hi
to toggle between displaying or
hiding the clock.
3. Press START
to accept the changes and
go back to user preferences menu display.
Loading ...
Loading ...
Loading ...