Loading ...
Loading ...
Loading ...
MAINTENANCE
31
ENGLISH
If it becomes necessary to stop or interrupt a selfcleaning
cycle due to excessive smoke or fire in the oven:
1. Press UPPER or LOWER CLEAR/OFF.
2. After the oven has cooled down, the DOOR LOCK
will automatically release allowing you to open the
oven door.
When using the self-clean feature:
•
A self-clean cycle cannot be started if Control
Lock feature is active.
•
Once the SELF CLEAN is set, the oven door will
lock automatically. You will not be able to open
the oven door until the oven is cooled. The lock
will release automatically.
•
Once the door has been locked the DOOR
LOCKED indicator light will stop flashing and
remain on. Allow about 15 seconds for the oven
door lock to engage.
NOTE
After the Self-Clean Cycle
•
It will not be possible to open the oven door until oven
temperature has cooled.
•
You may notice some white ash in the oven. Wipe it off
with a damp cloth after the oven cools.
These deposits are usually a salt residue that cannot be
removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the
cycle.
•
If oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack
supports with a small amount of vegetable oil to make
them glide more easily.
•
Fine lines may appear in the porcelain because it went
through heating and cooling. This is normal and will
not affect performance.
Loading ...
Loading ...
Loading ...