Loading ...
Loading ...
Loading ...
153
2-2. Charging
2
Plug-in hybrid system
■ If “Charging Stopped Due to Pulled Charging Connector” is
shown
*
: Electricity is consumed when operating “Battery Heater” (P.115), the air
conditioning-linked function (P.131) or Remote Air Conditioning System
(P.405).
Likely cause Correction procedure
Charging connector is removed
while charging
When the charging connector is
removed while charging, charging
stops. If you want to fully charge the
hybrid battery (traction battery),
reconnect the charging connector.
After the hybrid battery (traction bat-
tery) is fully charged, the charging
connector is removed while the
hybrid battery (traction battery) is
being recharged again because
electricity-consuming functions
*
have
been used and the remaining charge
is now reduced.
Charging connector is not securely
connected
Check the connection status of the
charging connector.
When connecting the charging
connector, make sure not to touch
the latch release button. Insert the
charging connector securely until
you hear a click. The charging con-
nector may not be connected cor-
rectly if the latch release button is
pressed while inserting.
After connecting the charging con-
nector, check that the latch release
button is not pressed and the
charging indicator of the charging
port is turned on.
If charging cannot be carried out,
even though the proper procedures
were followed, have the vehicle
inspected by your Toyota dealer.
Latch release button of charging
connector was pressed while
charging
When the latch release button is
pressed while charging, charging
stops. To continue charging, recon-
nect the charging connector.
Loading ...
Loading ...
Loading ...