Loading ...
Loading ...
Loading ...
151
2-2. Charging
2
Plug-in hybrid system
■ Charging ends earlier than time set in “Departure”
AC charging cable was removed and
reinserted while charging indicator of
the charging port was flashing
If the AC charging cable is removed
and reinserted while the charging
indicator is flashing, the charging
schedule is canceled (P.125).
Temporarily remove the AC charging
cable, and then reconnect it.
The Remote Air Conditioning Sys-
tem was operated
When the Remote Air Conditioning
System is operated, the system will
start charging, even if the charging
schedule is registered. To carry out
charging using the charging sched-
ule, stop the Remote Air Condition-
ing System, and then reconnect the
AC charging cable.
“Battery Heater” (P.115) operated
When the charging mode is set to
“Departure”, “Battery Heater” may
operate before charging starts.
Check the status of the charging
indicator of the charging port.
(P.100)
Outside temperature is low and
hybrid battery (traction battery)
warming control (P.116) operated
(Alaska and Canada only)
When hybrid battery (traction bat-
tery) warming control operates, the
charging schedules are ignored and
charging starts. In order to protect
the hybrid battery (traction battery),
allow charging to continue.
Likely cause Correction procedure
Charging end time does not match
estimated end time due to condition
of power source or outside tempera-
ture
If sudden changes in temperature or
changes in the condition of the
power source occur while charging,
charging may end earlier than the
time estimated by the system.
Likely cause Correction procedure
Loading ...
Loading ...
Loading ...