Loading ...
Loading ...
Loading ...
148
2-2. Charging
■ The error warning indicator on the CCID (Charging Circuit
Interrupting Device) flashes.
■ Charging indicator of the charging port does not illuminate,
even though charging connector is connected.
Likely cause Correction procedure
Electrical leakage detection function
or self-diagnostic function operates
and power is cut off
When the voltage is insufficient, the
error warning indicator may flash
when there is noise interference.
Perform a reset and connect to a
proper power source. (P.105)
If charging does not start, immedi-
ately stop charging and contact your
Toyota dealer.
Likely cause Correction procedure
The plug is not properly connected to
the outlet
Check whether the plug is properly
connected to the outlet.
Charging connector is not securely
connected to AC charging inlet
Check the connection status of the
charging connector.
When connecting the charging
connector, make sure not to touch
the latch release button. Insert the
charging connector securely until
you hear a click. The charging con-
nector may not be connected cor-
rectly if the latch release button is
pressed while inserting.
After connecting the charging con-
nector, check that the latch release
button is not pressed and the
charging indicator of the charging
port is turned on.
If the charging indicator of the
charging port does not illuminate,
even though the charging connector
is securely connected, there may be
a malfunction in the system. Immedi-
ately stop charging and contact your
Toyota dealer.
Loading ...
Loading ...
Loading ...