Loading ...
Loading ...
Loading ...
137
2-2. Charging
2
Plug-in hybrid system
then press .
Press to return to the previous
screen.
■ Setting “Charge Now” to on
The “Charge Now” setting can
be changed by performing one
of the two following procedures.
Operation on “Charging
Schedule” screen
1 Perform step 1 to 4 of the
“Registering the charging
schedule” procedure
(P.133) and display
“Charging Schedule” screen.
2 Press or of the meter
control switches to select
“Charge Now”, and then
press .
Each time is pressed, “Charge
Now” switches between on and off.
Operation on “Closing Dis-
play” screen
*
*
: If “Closing Display” is not set to
“Charging Schedule” on the
screen of the multi-information
display, the “Closing Display” is
not displayed. In this case, check
the settings on the multi-informa-
tion display.
1 Turn the power switch off.
The “Closing Display” screen is dis-
played on the multi-information dis-
play. (P.138)
2 Press to set “Charge
Now” to on.
Each time is pressed, “Charge
Now” switches between on and off.
After setting operations are
complete, charging starts when
the AC charging cable is con-
nected. (P.123)
■ Changing “Next Event”
*
*
: When “Charge Now” is set to on
or when using “My Room Mode”
(P.144) etc., it is not possible to
change the registered “Next
Event”.
1 Perform step 1 to 4 of the
“Registering the charging
schedule” procedure
(P.133) and display
“Charging Schedule” screen.
2 Press or of the meter
control switches to select
“Next Event”, and then press
.
The “Next Event” screen will be dis-
played.
Loading ...
Loading ...
Loading ...