Loading ...
Loading ...
Loading ...
94
1
2
3
4
5
6
7
8
9
10
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting
Modes
Tv, Av, M, C1,
and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
• After you set the shutter speed or aperture value, the exposure level
may change if you adjust the zoom or recompose the shot.
• Screen brightness may change depending on your specied shutter
speed or aperture value. However, screen brightness remains the
same when the ash is up and the mode is set to [h].
• Use a sufciently charged battery when shooting with the shutter
speed set from 40 to 250 seconds, because the longer shooting
time shortens battery life more than other shooting methods.
• To have both the shutter speed and aperture value automatically
adjusted to obtain standard exposure, hold the shutter button
halfway and press the < > button. Note that standard exposure
may not be possible with some settings.
• Images shot at high ISO speeds may look grainy.
• [D]: Manual
• Calculation of standard exposure is based on the specied metering method
(=
69).
• The battery level indicated is based on estimated battery consumption under
the current shutter speed setting. Changing the shutter speed may cause this
level to be updated.
• You can customize camera operation so that turning the <7> dial adjusts the
shutter speed and turning the <z> dial adjusts the aperture value (=
96).
Still Images
Adjusting the Flash Output
Choose from the three ash levels in [D] mode.
1 Enter [D] mode.
Set the mode dial to [D].
2 Congurethesetting.
Raise the ash, press the <r> button and
immediately turn the <z> dial to choose
the ash level, and then press the <m>
button.
Once the setting is complete, the ash
output level is displayed.
[
]: low, [ ]: medium, [ ]: high
• You can also set the ash level by choosing [X] in the FUNC. menu (=
24),
or by accessing MENU (=
25) and choosing [4] tab ► [Flash Control] ►
[Flash Output].
• You can set the ash level in [M] or [B] mode by accessing MENU
(=
25) and choosing [4] tab ► [Flash Control] ► [Flash Mode] ►
[Manual].
• You can also access the [Built-in Flash Settings] MENU screen as follows
(except when an optional external ash is mounted).
- Press and hold the <r> button for at least one second.
- When the ash is up, press the <r> button and immediately press the
<n> button.
Loading ...
Loading ...
Loading ...