Loading ...
Loading ...
Loading ...
30 CLEANING YOUR OVEN ACCESSORIES
CLEANING YOUR OVEN ACCESSORIES
Removing the trays and shelves from your
appliance
Slide the dish and grill tray towards you until they
reach the front stop.
Tilt them up at the front to clear the side supports,
taking care not to spill the contents.
Lift them clear.
Wash the tray and shelves in hot soapy water.
Reverse the above steps to put the grill tray and
shelves back again.
Ensure that they are placed between the 2 support
wires.
Removing the side racks or shelf supports
Grasp the shelf support at the front.
Pull it firmly inwards
Cleaning your oven door
The oven door has been designed to allow the two
inner door glasses to be removed for cleaning without
removing the door from the product.
Removing the inner door glass for cleaning:
Open the door fully to gain access to the hinges.
Push down the hinge locking tab as shown in the
diagram on both sides of door.
Locking tab up - normal position Locking tab down - for cleaning
Gently close the door until it stops in partially open
position on the locking tab (the door will not fully
close with the locking tab in the down position).
In this position the top door trim can be removed by
pushing each side on the serrated surface to release
the clips and lift the trim away from the door.
To remove the inner glass, tilt top of glass towards
the oven and lift out.
The middle glass is removed in the same way.
The inner side of outer glass can be cleaned in-situ
when inner and middle glass is removed.
Clean glass using detergent and warm water, wipe
clean and dry thoroughly.
Re-assembling the door glass panels:
Replace the middle glass back to the door.
The middle glass is a clear pane and orientation
of the glass is not important.
Replace the inner glass back to the door, ensuring
the side with black ceramic paint faces away from
the oven cavity when door is closed.
Fully open the door and return the locking tabs to
their normal position and close the door.
Door top trim
Inner glass
Press here on each
side to release trim clips
Middle glass
Door top m
Inner glass
Press here on
each side to
release trim clips
Middle glass
31CLEANING YOUR OVEN
WVEP916SB & WFEP915SB
Pyrolytic cleaning of the oven cavity
The oven has the Pyrolytic self-cleaning function, it
cleans by burning off the spatters and accumulated dirt
and grease from the oven liner, at high temperature. This
process produces ash which can then be wiped out of
the oven cavity. It is recommended you clean your oven
regularly to keep the oven in its best condition.
Light clean - this is an energy saving cycle that can
be used on a regular basis if the oven is lightly soiled.
Possibly after every 2nd or 3rd roast.
Normal clean - use this as the regular cycle about
once every 2-3 months.
Before carrying out the Pyrolytic cleaning function
WARNING
WARNING
Clean large deposits, spills or grease from the oven
cavity.
Please keep small children at a safe distance. The
appliance becomes very hot.
Never clean non-stick baking trays and tins in the
oven during the pyrolytic cycle. High temperatures
damage the non-stick coating and poisonous gas is
released.
Pyrolitic cleaning can release fumes that are not
harmful to humans, including infants or persons with
medical conditions, however you are strongly advised
to provide good ventilation during and after each
pyrolytic cleaning process.
Unlike humans, some birds and reptiles can be
extremely sensitive to the potential fumes emitted
during the pyrolytic cleaning process. It is strongly
advised to remove any pets (especially birds) from
the vicinity of the appliance during and after each
pyrolytic cleaning process.
Small pets can also be highly sensitive to the
localized temperature changes in the vicinity of all
pyrolytic ovens when the pyrolytic self cleaning
program is in operation.
WARNING
CAUTION
All accessories must be removed from the oven,
including shelves, trays and side racks.
During pyrolytic cleaning the air outlet vent above
the door must be kept clear of any obstruction (e.g.
tea towels).
Do not use your oven to clean miscellaneous items
(e.g. cookware).
To prevent damage, do not use acids, sprays or
similar cleaning agents.
CLEANING YOUR PYROLYTIC OVEN
TIPS & INFORMATION
IMPORTANT
During the pyrolytic cleaning function, it is advisable not
to use a cooktop if it is fitted above the oven. This could
cause overheating and damage to both appliances.
The cooling fan will operate at an increased speed for
Pyrolytic cleaning and will continue to run until the oven
has cooled down. It is recommended to use the Pyro
clean function regularly to keep the oven in its best
condition.
Pyrolytic cleaning
Switch on the appliance by pressing “On / Off”.
Press the “Function” button repeatedly until “P1” is
displayed.
Press the “–” or “+” symbols to choose between
“1hrs 30 min” (light clean or “2hrs 30 min” (normal
clean) for the appropriate level of cleaning.
Press the “Pyro Accept” button to commence the
cleaning process.
The oven will begin heating and the “Remaining
Time” will be displayed.
The pyrolytic cleaning function can be stopped
at any time during the cycle by pressing the
“On / Off”.
During Pyrolytic cleaning
When the temperature in the oven approaches 300˚C,
the door will automatically lock and a padlock symbol
will appear on the display.
After Pyrolytic cleaning
The door will only unlock when the oven has cooled to a
safe temperature. Turning the function off will not unlock
the door.
After cool-down, wipe the ash out of the oven with a
soft damp cloth and warm water. To restore the enamel
shine to more difficult areas, use a damp cloth with
vinegar and detergent.
WARNING
CAUTION
Do not turn off the mains power supply to the oven
during the pyrolytic cleaning cycle. This could damage
the appliance.
Loading ...
Loading ...
Loading ...