Loading ...
Loading ...
Loading ...
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have nished.
39
5.4 Replacing the door glass panel
Remove the oven door (see 5.1).
To remove the inner door glass panel
Carefully place the door, outer side up, on a clean level
surface. Undo the 3 retaining screws in the top of the
door and remove the trim. Undo the 5 retaining screws
from the lower edge of the door and remove the
bottom trim (Fig.9-21). Lift out the glass panel.
To remove the centre glass
Carefully place the door, inner side up, on a clean level
surface. Remove the outer door panel (see 5.2).
Undo the 8 screws holding the centre glass panel
assembly in place (Fig.9-22). Lift out the centre glass
panel assembly, gasket and inner centre glass panel.
Reassemble in the reverse order.
5.5 Replacing the oven door seal
Open the oven door. The seal is held in place by small
spring clips to the cooker front. At the corner, sqeeze
the clip and pull the seal diagonally away from the
door centre until that clip is released (Fig.9-23).
Proceed to the next clip and release it in a similar way,
and so on. Use force if the clips are sti, as the old seal
will be discarded.
When tting the new seal, position the seal join at the
bottom. Clip the new seal in one of the corner holes
of the door, and proceed round the door snapping in
each spring clip in turn.
5.6 Replacing the oven door hinge
Remove the door (see 5.1).
Remove the inner door panel (see 5.3).
Lift out the inner panel and place it, outer side up, on
a clean level surface. Undo the screws securing the
hinge in place. Remove the hinge. Replace the hinge
and rebuild the door in the reverse order.
ArtNo.320-0005 Oven door rubber seal
Gasket
Centre glass
panel assembly
Inner centre
glass panel
Fig.9-22
Fig.9-21
Fig.9-23
Loading ...
Loading ...
Loading ...