Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
30
Checks
Hotplate Check
Check each burner in turn. There is a ame safety device (FSD)
that stops the ow of gas to the burner if the ame goes out.
For each burner, turn the control knob to the solid ame
symbol. Press in the control knob. This lets gas through to
the burner. Keep holding the knob pressed in and press the
igniter button or light with a match. Keep holding the control
knob pressed in for about 10 seconds.
If, when you let go of the control knob the burner goes out,
the safety device has not held in. Wait one minute then try
again this time holding the control pressed in for slightly
longer.
Oven Check
Turn on the oven and check that it starts to heat up. Check
that the oven lights are working.
Note: The oven light bulb is not included in the guarantee.
Turn o the oven.
Fitting the Plinth
Remove the 3 screws for the plinth mounts along the front
bottom edge of the cooker (Fig.7-18). Fasten the plinth using
these screws (alternative colour screws can be found in the
loose parts pack).
Refitting the Drawer
To ret the drawer, pull the side rails fully out. Carefully move
the drawer back between the rails and rest it on the side rails
(Fig.7-19).
At each side, hold the front of the drawer and pull the side
rail forward so that the clips click into position, holding the
drawer to the side rails (Fig.7-20).
Customer Care
Installer: Please complete your details in this Guide, inform
the user how to operate the cooker and hand oven the
instructions.
Thank you
Make sure the inner
rail is forwards
ArtNo.350-0017 - Securing the plinth
Fig.7-18
Fig.7-19
Fig.7-20
Loading ...
Loading ...
Loading ...