Loading ...
Loading ...
Loading ...
INSTALLATION
Check the appliance is electrically safe and gas sound when you have nished.
27
ArtNo.070-0001 - Fitting the restaining chain
Fig.7-11
Fitting the Stability Bracket
A stability bracket and chain MUST be tted when the cooker
is connected to a exible gas supply.
Unless properly installed, the cooker could be tipped by
leaning on the door. Injury might result from spilled hot
liquids or from the cooker itself.
Floor Fixing
Assemble the parts (Fig.7-8).
Using suitable screws and xings, attach the assembled
bracket to the oor to give a minimum engagement of
65mm into the back of the cooker.
Adjust and lock the inner stability bracket to give a 3 mm
clearance above the engagement edge in the back of the
cooker (Fig.7-9).
Wall Fixing
Where oor xing is impractical and provided that the outer
stability bracket can be attached to a solid wall, the stability
bracket may be attached to a wall (Fig.7-10). Make sure to
use suitable screws and xings.
Fitting the Restraining Chain
The restraining chain MUST be tted.
The length of chain between the appliance and the wall xing
should prevent strain on the gas and electricity connections,
but still allow access to unhook the chain when the cooker is
pull forward.
Fix the supplied hook securely to the wall.
Measure the length of chain required. Use the hexagon-
headed screw, washers and bolt supplied in the restraining
chain kit to x the chain to one of the holes at the top of the
ue trim bracket (Fig.7-11).
Hook the other end of the chain to the wall xing.
Levelling
We recommend you use a spirit level on a shelf in the oven to
check for level.
Place the cooker in its intended position, taking care not to
twist it within the gap between the kitchen units as damage
may occur to the cooker or the units.
There are two screw-down feet at the front and two levelling
rollers at the rear, which can be used to adjust the height and
level of the cooker.
Make sure the oven door is aligned to the cooker face.
A
B
A
B
Fig.7-8
ArtNo.070-0014 - Stability bracket - Wall fitting
Cooker
Stability bracket
Floor
3 mm min
Fig.7-9
A – Outer stability bracket, B – Inner stability bracket
ArtNo.070-0015 - Stability bracket - Wall fitting
Cooker
Outer stability
bracket
Floor
Wall
3 mm min
Fig.7-10
Loading ...
Loading ...
Loading ...