Loading ...
Loading ...
Loading ...
Blind Spot Alert Off
When the BSM system is turned off there will be
no visual or audible alerts from either the BSM
or RCP systems.
NOTE:
The BSM system will store the current operating
mode when the vehicle is shut off. Each time
the vehicle is started the previously stored mode
will be recalled and used.
General Information
The following regulatory statement applies to all
Radio Frequency (RF) devices equipped in this
vehicle:
This device complies with Part 15 of the FCC
Rules and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any interference
received, including interference that may
cause undesired operation.
NOTE:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
Forward Collision Warning (FCW)
Operation
The Forward Collision Warning (FCW) system
provides the driver with audible warnings, visual
warnings (within the instrument cluster dis-
play), to warn the driver when it detects a
potential frontal collision. The warnings are in-
tended to provide the driver with enough time to
react, avoid or mitigate the potential collision.
NOTE:
FCW monitors the information from the forward
looking sensors as well as the Electronic Stabil-
ity Control (ESC) System, to calculate the prob-
ability of a forward collision. When the system
determines that a forward collision is probable,
the driver will be provided with audible and
visual warnings.
WARNING!
Forward Collision Warning (FCW) is not in-
tended to avoid a collision on its own, nor can
FCW detect every type of potential collision.
The driver has the responsibility to avoid a
collision by controlling the vehicle via brak-
ing and steering. Failure to follow this warn-
ing could lead to serious injury or death.
Turning FCW On Or Off
The Forward Collision activation/deactivation is
located in "Uconnect Settings" under "Safety
And Driving Assistance.” Forward Collision can
be checked or unchecked.
When FCW is selected off, there will be an "FCW
OFF" icon that appears in the instrument cluster
display.
NOTE:
SRT Models:
The FCW system’ s default state is on. If the
system is turned off followed by the ignition
being turned to OFF, the FCW system will reset
to on when the vehicle’s engine is restarted.
SAFETY
64
Loading ...
Loading ...
Loading ...