Loading ...
Loading ...
Loading ...
The turn signal lights will flash to acknowledge
the unlock signal. The illuminated entry system
will also be activated.
NOTE:
All door unlock settings can be programmed to
your convenience through Uconnect Settings.
Refer to “Uconnect Settings” in “Multimedia”
in the Owner’s Manual for further information.
• Unlock the driver door on the first push of the
key fob unlock button.
• Unlock all doors on the first push of the key
fob unlock button.
NOTE:
To unlock doors and trunk with passive entry ,
Refer to “Keyless Enter -N-Go — Passive Entry”
located in “Doors” in “Getting To Know Your
V ehicle” in the Owner’s Manual for further infor -
mation.
NOTE:
When you use the key fob to open any door , the
courtesy lights, overhead lights, and approach
lighting in the outside mirrors (if equipped) will
turn on. Refer to “Interior Lights” in “Getting To
Know Y our Vehicle” in the Owner’s Manual for
further information
To Lock The Doors And Trunk
Push and release the lock button on the key fob
to lock all doors.
The turn signal lights will flash and the horn will
chirp to acknowledge the signal if programmed.
Refer to “Uconnect Settings” in “Multimedia”
in the Owner’ s Manual for further programmable
information.
NOTE:
To lock the doors with passive entry, Refer to
“Keyless Enter-N-Go — Passive Entry” located
in “Doors” in “Getting To Know Your Vehicle” in
the Owner’s Manual for further information.
If one or more doors are open, or the trunk is
open, the doors will lock. The doors will unlock
automatically if the key is left inside the passen-
ger compartment, otherwise the doors will stay
locked.
Request For Additional Remote Controls
NOTE:
Only key fobs that are programmed to the ve-
hicle electronics can be used to start and oper -
ate the vehicle. Once a key fob is programmed
to a vehicle, it cannot be programmed to any
other vehicle.
WARNING!
• Always remove the key fobs from the ve-
hicle and lock all doors when leaving the
vehicle unattended.
• For vehicles equipped with Keyless Enter-
N-Go — Ignition, always remember to
place the ignition in the OFF mode.
Duplication of key fobs may be performed at an
authorized dealer. This procedure consists of
programming a blank key fob to the vehicle
electronics. A blank key fob is one that has
never been programmed.
NOTE:
When having the Sentry Key Immobilizer Sys-
tem serviced, bring all vehicle keys with you to
an authorized dealer.
13
Loading ...
Loading ...
Loading ...