User Manual - Page 128

For 2018 DODGE CHALLENGER SRT.

Loading ...
Loading ...
Loading ...
The four ParkSense sensors, located in the rear
fascia/bumper, monitor the area behind the ve-
hicle that is within the sensors’ field of view.
NOTE:
The sensors can detect obstacles from ap-
proximately 12 inches (30 cm) up to
79 inches (200 cm) from the rear bumper
while the vehicle is in REVERSE, a warning
will display in the instrument cluster display
only when “Sound and Display” is selected
from the Uconnect System.
As the vehicle moves closer to the obstacle,
the instrument cluster display will show fewer
arcs and the sound tone will change from
slow, to fast, to continuous.
Refer to your Owner's Manual for further infor -
mation.
PARKVIEW REAR BACK UP CAMERA
Your vehicle is equipped with the ParkView Rear
Back Up Camera that allows you to see an
on-screen image of the rear surroundings of
your vehicle whenever the gear selector is put
into REVERSE.
The ParkView camera is located on the rear of
the vehicle above the rear license plate. The
image will be displayed in the touchscreen dis-
play along with a caution note to “check entire
surroundings” across the top of the screen.
After five seconds, this note will disappear.
NOTE:
The ParkView Rear Back Up Camera has pro-
grammable modes of operation that may be
selected through the Uconnect System. Refer to
“Uconnect Settings” in “Multimedia” in your
Owner’s Manual for further details.
If your vehicle is equipped with the Camera
Delay feature and it is turned on, the rear cam-
era image will be displayed for up to 10 seconds
when the vehicle is shifted out of REVERSE.
However, this feature is canceled if the forward
vehicle speed exceeds 8 mph (13 km/h), the
transmission is shifted into PARK, the vehicle's
ignition is cycled to OFF, or by pressing the
image defeat [X] button.
When the vehicle is shifted out of REVERSE
(with Camera Delay turned off), the rear camera
mode is exited and the last touchscreen appears
again.
When enabled, active guide lines are overlaid on
the image to illustrate the width of the vehicle
and its projected backup path based on the
steering wheel position. The active guide lines
will show separate zones that will help indicate
the distance to the rear of the vehicle.
Different colored zones indicate the distance to
the rear of the vehicle.
WARNING!
Drivers must be careful when backing up
even when using the ParkView Rear Back Up
Camera. Always check carefully behind your
vehicle, and be sure to check for pedestrians,
animals, other vehicles, obstructions, or
blind spots before backing up. Y ou are re-
sponsible for the safety of your surroundings
and must continue to pay attention while
backing up. Failure to do so can result in
serious injury or death.
STARTING AND OPERATING
126
Loading ...
Loading ...
Loading ...