Loading ...
Loading ...
Loading ...
En
9
Part names and functions
8 TILTABLE DISPLAY unlock button
Releases the lock that is engaged when the TILTABLE DISPLAY is
closed.
9 TILTABLE DISPLAY
For how to use the display, see page 10 .
a PHONES terminal (page 17 )
Connect headphones here.
Supports a 1/4” stereo phone plug and a 3.5 mm stereo mini plug,
and two sets of headphones can be used at the same time.
b LEVEL control (page 17 )
Adjusts the sound level output from the headphones.
c MIXING control (page 17 )
This adjusts the monitor volume balance of the sound of channels for
which the [CUE] button is pressed and the sound of the [MASTER]
channel.
d MONO SPLIT, STEREO selector switch (page 17 )
Switches how the monitor sound output from the headphones is
distributed.
e PARAMETER control
Adjusts the SOUND COLOR FX parameter.
f SOUND COLOR FX buttons
These turn the SOUND COLOR FX effects on/off.
g OFF, ON, TALK OVER selector switch (page 17 )
Turns the microphone on/off.
h Microphone indicator (page 17 )
i EQ (HI, LOW) controls (page 17 )
These adjust the tone quality of the [MIC1] and [MIC2] channels.
j MIC LEVEL control (page 17 )
Adjusts the level of the sound input to the [MIC1] and [MIC2]
channels.
k MIDI ON/OFF buttons
Switches the MIDI function on and off.
l USB connection indicator
An indicator lights when a computer is connected. It flashes when
the driver software is not installed on the computer.
m USB terminal (page 16 )
Connect the computer.
n Input selector switches (page 17 )
Selects the input source of each channel from the components con-
nected to this unit.
o EQ/ISO (HI, MID, LOW) controls
These adjust the sound quality of the respective channels.
p COLOR control
This changes the parameters of the SOUND COLOR FX of the differ-
ent channels.
q CROSS FADER ASSIGN (A, THRU, B) selector switch
(page 17 )
Sets the output destination of each channel to [A] or [B].
r Crossfader (page 17 )
Outputs audio signals assigned by the crossfader assign switch cor-
responding to the curve characteristics selected by [CROSS FADER]
(Crossfader Curve Selector Switch).
s MASTER LEVEL control (page 17 )
Adjusts the audio level output from the [MASTER1] and [MASTER2]
terminals.
t Master Level Indicator (page 17 )
Displays the audio level output from the [MASTER1] and [MASTER2]
terminals.
u BALANCE control
Adjusts the left/right balance of the sound output from the
[MASTER1] terminals, etc.
v BOOTH MONITOR control (page 18 )
Adjusts the level of audio signals output from the [BOOTH] terminal.
w EQ CURVE (ISOLATOR, EQ) selector switch
Switches the function of the [EQ/ISO (HI, MID, LOW)] controls.
x CH FADER ( , , ) selector switch
Switches the channel fader’s curve characteristics.
y CROSS FADER ( , , ) curve selector switch
This switches the crossfader curve characteristics.
z SEND/RETURN (1/4” JACK, ) selector switch
Switches the input/output source of the SEND/RETURN channel.
Select either the device connected to the [SEND/RETURN] terminal
on the control panel or the device connected to the mobile device
connection terminal.
A RETURN TYPE (AUX, INSERT) selector switch
Selects the SEND/RETURN method.
B Mobile device connection terminal (USB port)
Connect a mobile device to enable SEND/RETURN to be used for
apps.
C SEND/RETURN ON/OFF button
Turns SEND/RETURN on and off.
D SEND/RETURN LEVEL control
Adjusts the sound level of SEND/RETURN.
E Main unit display
Displays the effect name, BPM, effect parameter, etc.
F X-PAD
BEAT FX is on while this is touched. Also, the parameter can be
adjusted depending on the place touched.
G BEAT c, d buttons
Set the beat fraction for synchronizing the effect sound.
H TAP button
When the BPM measurement mode is set to [TAP], tap the button
with a finger to input the BPM manually.
I QUANTIZE (UTILITY, WAKE UP) button
— QUANTIZE: When the QUANTIZE function is turned on for BEAT
FX, the effect is applied to the sound without getting out of tempo
with the currently playing track.
— UTILITY: Displays the [UTILITY] screen.
— WAKE UP: Cancels the standby state.
J AUTO/TAP button
Switches the BPM measurement mode.
K FX FREQUENCY button
Select the range to apply BEAT FX. BEAT FX is applied to the range of
the button that is lit.
L Beat effect selector switch
Switches the BEAT FX effect type.
M Effect channel selector switch
Switches the channel to which the BEAT FX is to be applied.
N TIME control
Adjusts the BEAT FX’s time parameter.
O LEVEL/DEPTH control
Adjusts the BEAT FX’s quantitative parameter.
P Beat effect ON/OFF button
Turns BEAT FX on and off.
Loading ...
Loading ...
Loading ...