Loading ...
Loading ...
Loading ...
[Mixer Audio Output] pulldown menu list
CH1 (USB1/2) CH2 (USB3/4) CH3 (USB5/6) CH4 (USB7/8) CH5 (USB9/10) CH6 (USB11/12)
CH1 Control Tone
PHONO
1
CH2 Control Tone
PHONO
1
CH3 Control Tone
PHONO
1
CH4 Control Tone
PHONO
1
REC OUT
2
FX SEND
3
CH1 Control Tone CD/
LINE
1
CH2 Control Tone CD/
LINE
1
CH3 Control Tone CD/
LINE
1
CH4 Control Tone CD/
LINE
1
Post AUX Fader
2
CH1 Control Tone
DIGITAL
1
CH2 Control Tone
DIGITAL
1
CH3 Control Tone
DIGITAL
1
CH4 Control Tone
DIGITAL
1
Post CH1 Fader
2
Post CH1 Fader
2
Post CH2 Fader
2
Post CH3 Fader
2
Post CH4 Fader
2
Post CH2 Fader
2
CROSS FADER A
2
CROSS FADER A
2
CROSS FADER A
2
CROSS FADER A
2
Post CH3 Fader
2
CROSS FADER B
2
CROSS FADER B
2
CROSS FADER B
2
CROSS FADER B
2
Post CH4 Fader
2
MIC MIC MIC MIC CROSS FADER A
2
REC OUT
2
REC OUT
2
REC OUT
2
REC OUT
2
CROSS FADER B
2
MIC
1
Can be used with compatible software. The audio data is output with the same volume at which it is input to this unit, regardless of the [USB Output Level] setting.
2
When using for applications other than recording, pay attention to the DJ application’s settings so that no audio loops are generated. If audio loops are generated, sound
may be input or output at unintended volumes.
3 Can be used with compatible software.
Setting preferences
*: Setting upon purchase
Setting type Options settings Setting value Descriptions
DJ SETUP
TOUCH DISPLAY LOCK
OFF*, ON Turns the display touch function on/off.
LANGUAGE
Sets the display language.
LCD BRIGHTNESS 1, 2, 3*, 4, 5
Adjusts the display brightness.
OLED BRIGHTNESS 1, 2, 3*
Sets the main unit display’s brightness.
MIC LOW CUT
OFF, ON*
Turns on/off the function that cuts the low frequencies of the
microphone audio.
TALK OVER MODE
ADVANCED*, NORMAL
Selects the talk over function’s mode, [ADVANCED] or
[NORMAL].
TALK OVER LEVEL
–6 dB, –12 dB, –18 dB*, –24 dB Sets the talk over function’s sound attenuation level.
MIDI CH
1* to 16 Sets the MIDI channel.
MIDI BUTTON TYPE
TOGGLE*, TRIGGER
Selects the MIDI signal transmission mode, [TOGGLE] or
[TRIGGER].
Setting type Options settings Detail setting items Setting value Descriptions
ENGINEER
SETUP
ENGINEER SETUP LOCK
OFF, ON*
Turns the change lock setting for
ENGINEER SETUP setting items on/off.
MASTER OUT
1
PEAK LIMITER
OFF, ON*
Lessens sudden, unpleasant digital clip-
ping of the master output.
ATT.
0 dB*,
–3 dB, –6 dB, –9 dB, –12 dB
Sets the attenuation level of the sound out-
put from the [MASTER1] and [MASTER2]
terminals.
MONO/STEREO STEREO*, MONO
Select monaural/stereo master output
audio.
DIGITAL MASTER OUT
1
LEVEL
–5 dB, –10 dB, –15 dB, –19 dB*
Sets the maximum level of the sound
output from the [DIGITAL MASTER OUT]
terminals.
2
SAMPLING RATE
INT 44.1 kHz,INT 48 kHz,INT 88.2
kHz,INT 96 kHz*,WORD CLOCK
Sets the digital signal’s sampling rate.
PEAK LIMITER
OFF, ON*
Alleviates sudden, unpleasant digital clip-
ping of the digital master output.
MONO/STEREO STEREO*, MONO
Select monaural/stereo digital master
output audio.
BOOTH OUT
1
ATT.
0 dB*,
–3 dB, –6 dB, –9 dB, –12 dB
Sets the attenuation level of the sound
output from the [BOOTH] terminal.
MONO/STEREO STEREO*, MONO
Select monaural/stereo booth output
audio.
MIC OUT TO MASTER
1
PEAK LIMITER THRESHOLD
LEVEL
OFF*,15 dB,12 dB,9 dB,6 dB,3 dB,0 dB
Sets the microphone audio limiter added
to the master output.
MIC OUT TO BOOTH
1
LEVEL
0 dB*,
–3 dB, –6 dB, –9 dB, –12 dB,
–15 dB, –18 dB, OFF
Sets the microphone audio level added to
the booth output.
PEAK LIMITER THRESHOLD
LEVEL
OFF*,15 dB,12 dB,9 dB,6 dB,3 dB,0 dB
Sets the microphone audio limiter added
to the booth output.
PC UTILITY
1
OFF*, ON
Sets whether or not to launch the com-
puter’s setting utility software automati-
cally when a USB cable is connected.
AUTO STANDBY
1
OFF, ON* Turns the auto standby function on and off.
1
Normally, the [ENGINEER SETUP] setting values cannot be changed. Set [ENGINEER SETUP LOCK] to [OFF] before changing them.
2 Note that the output sound may be distorted even if the master level indicator does not light up to the very top.
En
30
Loading ...
Loading ...
Loading ...