Loading ...
Loading ...
Loading ...
Insert the dipstick all the way back
into the transmission securely as
shown in the illustration.
To thoroughly flush the transmission,
the technician should drain and refill
it with Honda ATF-Z1, then drive the
vehicle for a short distance. Do this
three times. Then drain and refill the
transmission a final time.
The transmission should be drained
and refilled with new fluid when this
service is shown on a maintenance
message in the Multi-Information
Display.
If you are not sure how to add fluid,
contact your dealer.
Check the brake fluid level in the
reservoirs monthly.
Replace the brake fluid every 3 years,
independent of mileage.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement.
Using any non-Honda brake fluid can
cause corrosion and decrease the life
of the system. Have the brake
system flushed and refilled with
Honda Heavy Duty Brake Fluid
DOT 3 as soon as possible.
Brake fluid marked DOT 5 is not
compatible with your vehicle’s
braking system and can cause
extensive damage.
If the level is below the lower
mark, add fluid into the dipstick
tube to bring it to the upper mark.
Pour the fluid slowly and carefully
so you do not spill any. Clean up
any spill immediately; it could
damage components in the engine
compartment.
Always use Honda ATF-Z1
(automatic transmission fluid). If
it’s not available, you may use a
DEXRON
III automatic
transmission fluid as a temporary
replacement. However, continued
use can affect the shift quality.
Have the transmission flushed and
refilled with Honda ATF-Z1 as
soon as it is convenient.
5.
6.
CONTINUED
Brake Fluid
Automatic Transmission Fluid, Brake Fluid
Maintenance
311
Main Menu
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...