Loading ...
Loading ...
Loading ...
Check the fluid level in the
windshield washer reservoir at least
monthly during normal use.
Check the fluid level with the engine
at normal operating temperature.
Park the vehicle on level ground.
Shut off the engine.
Remove the dipstick (yellow loop)
from the transmission, and wipe it
with a clean cloth.
Fill the reservoir with a good-quality
windshield washer fluid. This
increases the cleaning capability and
prevents freezing in cold weather.
When you refill the reservoir, clean
the edges of the windshield wiper
blades with windshield washer fluid
on a clean cloth. This will help to
condition them.
If the washer fluid is low, a
‘‘WASHER FLUID LOW’’ message
appears on the multi-information
display.
Insert the dipstick all the way into
the transmission as shown.
Remove the dipstick, and check
the fluid level. It should be
between the upper and lower
marks.
1.
2.
3.
4.
Windshield Washers Automatic Transmission Fluid
Windshield Washers, Automatic Transmission Fluid
310
NOTICE:
UPPER MARK
LOWER MARK
DIPSTICK
Do not use engine antif reeze
or a vinegar/water solution in the
windshield washer reservoir. Antif reeze
can damage your vehicle’s paint, while
a vinegar/water solution can damage
the windshield washer pump. Use only
commercially-available windshield
washer f luid.
Main Menu
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...