Loading ...
Loading ...
Loading ...
Each front door has a LOCK/
UNLOCK feature.
When you touch the door lock
sensor of the front door by the hand,
all the doors and the trunk will lock.
If you touch the door lock sensor of
the front door by the hand with glove,
the door sensor may delay to
respond or not respond by locking
the doors.
Theremoteisnotwithinthe
operating range.
The lock sensors do not operate if:
The built-in key is in the ignition
switch.
The doors are open.
The ignition switch is not in the
LOCK (0) position.
The remote is too close to the
vehicle.
The vehicle battery is dead.
Theremotebatteryisdead.
When you lock the doors, some
exterior lights blink once and the
system beeps once. When you
cannot set the security system
because the trunk or hood is open,
no exterior light blinks and/or no
beeper sounds.
Before locking the doors, make sure
theremoteisnotinsidethevehicle.
If a remote is within operating range
while you wash your vehicle or when
it is raining heavily, the door sensors
may respond by locking the doors.
Within 2 seconds of touching the
handle to lock the doors or locking
the doors with remote, pull the
handletomakesurethedoorsare
actually locked. The door unlock
sensors do not operate for about 2
seconds after the doors are locked.
To change the ‘‘KEYLESS ACCESS
BEEP’’ setting, see page .
To change the ‘‘KEYLESS ACCESS
LIGHT FLASH’’ setting, see page
.
90
89
Locking the Doors
Keyless Access System
130
DOOR LOCK SENSOR
Main Menu
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...