Loading ...
Loading ...
Loading ...
Set Up the Printer
37
1
• You cannot connect to the Internet via Wi-Fi while using Wireless Direct. To use the Internet, connect using
Infrastructure Mode.
Infrastructure Mode 1
Infrastructure Mode allows you to connect the printer to a computer or mobile device via a Wi-Fi access
point/router.
Before You Begin
First you must configure the Wi-Fi settings of the printer to communicate with your Wi-Fi access
point/router. After the printer is configured, computer or mobile devices on your network will have access
to the printer.
Important
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation. You must confirm your Wi-Fi settings before you proceed with this
installation.
• To configure the Wi-Fi settings again, or if the status of the printer's Wi-Fi connection is unknown, reset
the Wi-Fi settings of the printer.
1 Press the (Power) button to turn off the printer.
2 Press and hold the (Feed) / OK button and the (Power) button for about five seconds. The LED
indicator starts blinking in green.
3 While pressing the (Power) button, press the (Feed) / OK button twice.
4 Release the (Power) button.
Note
To achieve the best results with normal everyday document printing, use the printer as close to the Wi-Fi
access point/router as possible with minimal obstructions. Large objects and walls between the two
devices as well as interference from other electronic devices can affect the data transfer speed of your
documents.
Connect the printer to your Wi-Fi access point/router
a First, write down the SSID (network name) and password (network key) of your Wi-Fi access
point/router.
b Connect the printer and computer with a USB cable.
c On the printer, press the Menu/ (Select) button to select the [WLAN] menu, and then press the
(Feed) / OK button.
Set [On/Off] to [On].
Loading ...
Loading ...
Loading ...