Loading ...
Loading ...
Loading ...
Battery Charger (Optional:PA-BC-003)
147
12
Wall Mounting 12
The units can be wall-mounted with two screws per unit. Install the screws vertically with the spacing shown
below. Ensure the screws are correctly secured with wall anchors or studs. The cavity must face upward (as
shown) to hold the battery in place.
Use the Insert Nuts 12
Insert nuts are provided on the base of the battery charger. Using these insert nuts, screws may be fastened
to a board.
When fastening with screws, use the following types of screws.
M2.6 Pitch 0.45 Screws
Screws that are 0.14 in. (3.5 mm) to 0.28 in. (7 mm) longer than the thickness of the board
Note
• When attaching to a vertical board, the method of installation is the same as wall mounting (See Wall
Mounting on page 147).
• Be sure not to pinch the cables between the base of the battery charger and the board.
1: Dia. 0.12 in. - 0.18 in. (3 - 4.5 mm)
2: Dia. 0.33 in. (8.5 mm) or less
3: 0.48 in. (12.2 mm) or more
4: 1.75 in. - 1.87 in. (44.5 - 47.5 mm)
A: Wall material
B: Wall-mount slots
C: Screw
3
1
2
4
A
C
B
Loading ...
Loading ...
Loading ...