Loading ...
Loading ...
Loading ...
Menu Description
108
Fan mode
Switch the fan mode to suit installation at low or high altitudes (above 2,300 m (7,545.8')).
Option Function
Normal Setting for altitudes lower than 2,300 m (7,545.8').
High altitude Setting for altitudes of 2,300 m (7,545.8') or higher.
Vertical projection
You can ensure adequate cooling by switching the fan mode to suit upward- or downward-
facing installations. For precautions on vertical projection, see “Install Facing in the Correct
Direction” (P25).
Option Function
Off Does not alter the fan mode.
Upward Setting for use when the projector faces upward.
Downward Setting for downward projection.
• Incorrect settings may shorten the useful life of the lamp or other parts.
• The lamp mode is set to [Power saver] and cannot be changed when [Install
settings] > [Fan mode] is set to [High altitude].
• Be sure to perform this setting to use vertical projection.
• Projecting vertically without using this setting will shorten the useful life of the lamp
and other parts.
• Even if you complete this setting, vertical projection will result in a shorter useful life
of the lamp and other parts than horizontal projection.
Loading ...
Loading ...
Loading ...