Loading ...
Loading ...
Loading ...
26
GROUND TOO FINE. ADJUST
MILL 1 CLICK WHILE IN
OPERATION
ESC
The grinding is too ne and the coee is delive-
red too slowly or not at all.
Repeat coee delivery and turn the grin-
ding adjustment dial (A5) (g. 13) one click
clockwise towards “7” while the coee mill is
in operation. If after making at least 2 coees
delivery is still too slow, repeat the correction
procedure, turning the grinding adjustment
dial another click until delivery is correct (see
section “9.3 Adjusting the coee mill”). If the
problem persists, make sure the water tank
(A16) is fully inserted.
If the water softener lter (C4) is present, an
air bubble may have been released inside the
circuit, obstructing delivery.
Insert the hot water/steam spout (C6) in the
appliance and deliver a little water until the
ow becomes regular.
SELECT A MILDER TASTE
OR REDUCE PREGROUND
COFFEE QUANTITY
ESC
Too much coee has been used.
Select a milder taste by pressing “
AROMA” (B6) or reduce the quantity of pre-
ground coee (maximum 1 measure).
INSERT WATER SPOUT
The hot water spout (C6) is not inserted or is
inserted incorrectly
Insert the water spout as far as it will go.
INSERT MILK CONTAINER
The milk container (D) is not inserted correctly. Insert the milk container as far as it will go (g.
18).
INSERT INFUSER ASSEMBLY
PUSH
The infuser (A19) has not been replaced after
cleaning.
Insert the infuser as described in section “16.9
Cleaning the infuser”.
Loading ...
Loading ...
Loading ...