Loading ...
Loading ...
Loading ...
12
2. Press < (B10) or
> (B8)
until “ AUTO-START” appears on
the display (B);
3. Select the function by pressing ” ”. The time setting
panel appears on the screen;
4. Press < o > corresponding to the hours and minutes until
the auto-start time is displayed;
5. Press
or to enable or disable
auto-start.;
6. To conrm, press “
OK” (or cancel and go back to the
settings menu by pressing “ ESC”), then press “ ESC”
to go back to the homepage.
The auto-start time is now set and the corresponding symbol is
displayed to indicate that the function has been enabled.
8.7 Auto-o (standby)
Auto-o can be set so that the appliance goes o after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-o, proceed as follows:
1. Press “
” (B2) to enter the menu;
2. Press < (B10) or > (B8) until “ AUTO-OFF” appears on
the display (B), together with the current selection (15 or 30
minutes, or 1, 2 or 3 hours);
3. Press “
” to select the required value;
4. Press “ ESC” to go back to the homepage.
Auto-o is now programmed.
8.8 Cup warmer
To warm the cups before making coee, you can enable the cup
warmer (A6) and rest the cups on the shelf.
1. Press “
” (B2) to enter the menu;
2. Press < (B10) or
> (B8)
until “ CUP WARMER” appears
on the display (B);
3. Press “
” per attivare- or disable-
the cup warmer.
4. Press “
ESC” to go back to the homepage.
8.9 Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable “Energy Saving”, proceed as follows:
1. Press “
” (B2) to enter the menu;
2. Press < (B10) o >
(B
8) until “ ENERGY SAVING” appears
on the display (B);
3. Press “
“ to enable- or disable -
energy saving.
4. Press “
ESC” to go back to the homepage.
The corresponding symbol appears on the display alongside the
time to indicate that the function has been enabled.
8.10 Coee temperature
To modify the temperature of the water used to make the coee,
proceed as follows:
1. Press “ ” (B2) to enter the menu;
2.
Press < (B10) or > (B8) until “ COFFEE TEMPERATURE” ap-
pears on the display (B) together with the current selection
(LOW, MEDIUM, HIGH or MAX);
3. Press “
” to select the required temperature;
4. Press “ ESC” to go back to the homepage.
Please note!
A dierent temperature can be set for each prole (see section
“15. Memorising your personal prole”).
8.11 Water hardness
For instructions on setting water hardness, see section “18. Set-
ting water hardness”.
8.12 Selecting the language
To modify the language of the display (B), proceed as follows:
1. Press “
” (B2) to enter the menu;
2. Press < (B10) o >
(B8)
nché appare sul display “ SE-
LECT LANGUAGE” appears on the display;
3. Press “
” : press < (B10) or > to display and select the ag
corresponding to the required language;
4. Press “
ESC” twice to go back to the homepage.
8.13 Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press “
” (B2) to enter the menu;
2. Press < (B10) or > (B8) until “
BEEP” appears on the
display (B);
3. Press “
“ to enable- or disable-
the beep;
4. Press “
ESC” to go back to the homepage.
8.14 Cup lighting
This function enables or disables the cup lights. The lighting is
enabled by default.
The lights comes on each time a coee or milk-based drink is
made and during each rinsing cycle.
To disable or enable this function, proceed as follows:
1. Press “
” (B2) to enter the menu;
2. Press < (B10) or > (B8) until “
CUP LIGHTING” appears on
the display (B);
3. Press “
“ to enable- or disable - the
cup lighting;
Loading ...
Loading ...
Loading ...