Loading ...
Loading ...
Loading ...
19
appliance cannot be used to make coee until you have cleaned
the grounds container (A10). Even if not full, the empty grounds
container message is displayed 72 hours after the rst coee has
been prepared. For the 72 hours to be calculated correctly, the
machine must never be turned o with the main switch.
Important! Danger of burns
If you make a number of cappuccinos one after the other, the
metal cup tray (A11) becomes hot. Wait for it to cool down be-
fore touching it and handle it from the front only.
To clean (with the machine on):
33
• Remove the drip tray
(A14) (g. 33), empty
and clean.
• Empty the grounds con-
tainer (A10) and clean
thoroughly to remove
all residues left on the
bottom. This can be
done using the spat-
ula on the brush (C5)
provided.
Important!
When removing the drip tray, the grounds container must be
emptied, even if it contains few grounds. If this is not done,
when you make the next coees, the grounds container may ll
up more than expected and clog the machine.
16.4 Cleaning the drip tray
Important!
34
The drip tray (A14) is tted
with a level indicator (A12)
(red) showing the level of
water it contains (g. 34).
Before the indicator pro-
trudes from the cup tray
(A11), the drip tray must be
emptied and cleaned, other-
wise the water may overow
the edge and damage the
appliance, the surface it rests
on or the surrounding area.
To remove the drip tray:
1. Remove the drip tray and the coee grounds container
(A10) (g. 33);
2. Empty the drip tray and grounds container and wash them;
3. Replace the drip tray and grounds container.
16.5 Cleaning the inside of the coee machine
Danger of electric shock!
Before cleaning internal parts, the machine must be turned o
(see section “7. Turning o”) and unplugged from the mains
power supply. Never immerse the coee machine in water.
35
1. Check regularly (about
once a month) that the
inside of the appliance
(accessible after remov-
ing the drip tray (A14) )
is not dirty. If necessary,
remove coee deposits
with the brush (C5) sup-
plied and a sponge.
2. Remove all the residues
with a vacuum cleaner
(g. 35).
16.6 Cleaning the water tank
1. Clean the water tank (A16) regularly (about once a month)
and whenever you replace the water softener lter (C4) (if
provided) with a damp cloth and a little mild washing up
liquid;
2. Remove the lter (if present) and rinse with running water;
3. Replace the lter (if provided), ll the tank with fresh
water and replace the tank;
4. (Models with water softener lter only) Deliver about
100ml of hot water to reactivate the lter.
16.7 Cleaning the coee spouts
36B
36A
1. Clean the coee spouts
(A8) regularly with a
sponge or cloth (g.
36A);
2. Check that the holes in
the coee spouts are not
blocked. If necessary,
remove coee deposits
with a toothpick (g.
36B).
16.8 Cleaning the pre-ground coee funnel
Check regularly (about once a month) that the pre-ground
coee funnel (A4) is not blocked. If necessary, remove coee
deposits with the brush (C5) supplied.
Loading ...
Loading ...
Loading ...