Loading ...
Loading ...
Loading ...
14
9.3 Adjusting the coee mill
The coee mill is set by default to prepare coee correctly and
should not require regulating initially.
However, if after making the rst few coees you nd that the
coee is either too weak and not creamy enough or delivery is
too slow (a drop at a time), this can be corrected by adjusting
the grinding adjustment dial (A5 - g. 10).
Please note!
The grinding adjustment dial must only be turned when the
coee mill is in operation.
If the coee is delivered too slowly or
not at all, turn one click clockwise to-
wards “7”.
For fuller bodied creamier coee, turn
one click anticlockwise towards “1” (do
not turn more than one click at a time
otherwise the coee could be delivered a drop at a time).
These adjustments will only be evident after at least 2 cups of
coee have been delivered. If this adjustment does not obtain
the desired result, turn the dial another click.
9.4 Tips for a hotter coee
For hotter coee, you should:
• perform a rinse cycle by selecting the “Rinse” function in
the settings menu (see section “8.1 Rinsing ”);
• warm the cups with hot water (using the hot water func-
tion, see section “12. Delivering hot water”);
• increase the coee temperature in the settings menu (see
section “8.10 Coee temperature ”).
9.5 Making coee using coee beans
Important!
Do not use caramelised or candied coee beans as they could
stick to the coee mill and make it unusable.
1. Fill the container (A3) (g. 11) with coee beans;
2. Place a cup under the coee spouts (A8);
3. Lower the spouts as near as possible to the cup (g. 12).
This makes a creamier coee;
4. Press <(B10) or > (B8) until the required coee is
displayed;
5. Then select your required coee:
• ESPRESSO
• DOPPIO+
• COFFEE
• LONG
• 2 ESPRESSO
6. Preparation begins. An image of the selected drink appears
on the display (B) together with a progress bar which grad-
ually lls as preparation progresses.
Please note:
• You can prepare 2 cups of ESPRESSO coee at the same
time by pressing “2X
“ during preparation of 1
ESPRESSO (the image is displayed for a few seconds at the
start of preparation).
• While the machine is making coee, delivery can be inter-
rupted at any moment by pressing “ STOP”.
• As soon as delivery has ended, to increase the quantity of
coee in the cup, just press “ EXTRA”. When the required
quantity is reached, press “ STOP”.
Once the coee has been made, the appliance is ready to make
the next drink.
Please note!
• Various alarm messages could be displayed while using
the appliance (FILL TANK, EMPTY GROUNDS CONTAINER,
etc.). Their meaning is explained in section “23. Displayed
messages”.
• For hotter coee, see section “9.4 Tips for a hotter coee”.
• If the coee is delivered a drop at a time, too weak and not
creamy enough or too cold, read the tips in section “9.3 Ad-
justing the coee mill” and section “24. Troubleshooting”.
• Preparation of each coee can be customised (see sections
“14. Customising the drinks” and “15. Memorising your
personal prole”).
9.6 Making coee using pre-ground coee
Important!
• Never add pre-ground coee when the machine is o or it
could spread through the inside of the machine and dirty
it. This could damage the appliance.
• Never use more than 1 level measure (C2) or it could dirty
the inside of the coee machine or block the funnel (A4).
Please note!
If you use pre-ground coee, you can only make one cup of cof-
fee at a time.
1. Press “
AROMA” (B6) repeatedly until “ ” (pre-
ground) appears on the display (B);
2. Open the pre-ground coee funnel lid (A2);
3. Make sure the funnel (A4) is not blocked, then add one
level measure of pre-ground coee (g. 13);
4. Place a cup under the coee spouts (A8) (g. 12);
5. Press the image corresponding to the required coee (ES-
PRESSO, COFFEE, LONG);
Loading ...
Loading ...
Loading ...