Loading ...
Loading ...
Loading ...
Instrument lighting
The parking lamps or low beams must be
switched on to adjust the brightness.
1. Push button 1 up or down repeatedly until
the appropriate symbol appears in the dis‐
play, accompanied by the brightness set‐
ting and the word "SET".
2. Press button 2.
3. Push button 1 up or down to select the de‐
sired brightness level.
4. Press button 2.
The display again shows the external tem‐
perature and the time.
Interior lights
General information
The interior lights, footwell lights, cargo area
lights, and courtesy lights are controlled auto‐
matically.
The LEDs for the courtesy lights are set in the
door handles and illuminate the ground in front
of the doors.
To avoid draining the battery, all lights inside
the car are switched off about 8 minutes after
the ignition is switched off, Start/Stop button,
refer to page 59.
Switching the interior lights on and off
Press the button.
To switch off permanently: press the button for
approx. 3 seconds.
To clear this setting: briefly press the button.
Reading lights
Press the button.
Reading lights are located at the front and rear
next to the interior lights.
Danger of burns
Do not reach into the opening of the
lamps; otherwise, there is a risk of burns.◀
Ambient lighting
Depending on the equipment, the interior light‐
ing can be set individually for some lights.
Selecting the color scheme
1.
"Settings"
2. "Lighting"
3. "Ambient:"
4. Select the desired setting.
Seite 89
Lamps Controls
89
Online Edition for Part no. 01 40 2 954 052 - II/15
Loading ...
Loading ...
Loading ...