Loading ...
Loading ...
Loading ...
Front
Height adjustment
▷ To raise: pull.
▷ To lower: press the button, arrow 1, and
push the head restraint down.
Rear
Height adjustment
▷ To raise: pull.
▷ To lower: press button, arrow 1, and push
headrest down.
The height of the middle head restraint cannot
be adjusted.
Removing at the front and rear
Only remove the head restraint if no one will be
sitting in the seat in question.
1.
Pull upward as far as possible.
2. Press the button, arrow 1, and completely
pull out the head restraint with the rear
seat backrest folded forward slightly.
Before transporting passengers
Reinstall the head restraint before trans‐
porting anyone in the seat; otherwise, the pro‐
tective function of the head restraint is unavail‐
able.◀
Seat and mirror memory
General information
Two different driver's seat and exterior mirror
positions can be stored and retrieved.
The adjustment of the backrest width and the
lumbar support is not stored in the memory.
Storing
1.
Switch on the radio ready state or the igni‐
tion, refer to page 59.
2. Adjust the seat and exterior mirrors to the
desired positions.
3.
Press the button. The LED in the
button lights up.
4. Press the desired memory button 1 or 2.
The LED goes out.
If the M button is pressed accidentally:
Press the button again. The LED goes
out.
Seite 50
Controls Adjusting
50
Online Edition for Part no. 01 40 2 954 052 - II/15
Loading ...
Loading ...
Loading ...