Loading ...
Loading ...
Loading ...
Adhere to the general instructions, refer to
page 250.
With Xenon headlights, the following lights are
designed with LED technology:
▷ Parking and roadside parking lights.
▷ Daytime running lights.
Contact your service center in the event of a
malfunction.
Parking lights and roadside parking
lights, daytime running lights
H8 bulb, 35 watt
1.
Switch off the lights and take the remote
control out of the ignition lock.
2. Remove the high-beam cover, refer to
page 251.
3. Turn the bulb by approx. 90˚, see arrow,
and pull it out.
4. Disconnect the plug, change the bulb and
reconnect the plug.
5. Insert the bulb and turn it until it stops.
6. Reattach the cover.
Turn signals, front
21-watt bulb, PY21W
1. Switch off the lights and take the remote
control out of the ignition lock.
2. Open the folding cover in the wheel arch,
refer to page 251.
3. Turn the turn signal bulb socket 1 to the
left and remove it.
4. Apply gentle pressure to the bulb while
turning it to the left for removal and re‐
placement.
5. Insert the turn signal bulb socket 1 and
turn it all the way to the right.
6. Attach the folding cover in the wheel arch.
Turn signal in exterior mirror
Follow the general instructions on lights and
bulbs, refer to page 250.
Contact your service center in the event of a
malfunction.
Tail lights
The tail lights consist of two parts. One part is
in the tailgate and the other is in the fender.
P21W bulbs, 21 watt
Seite 253
Replacing components Mobility
253
Online Edition for Part no. 01 40 2 954 052 - II/15
Loading ...
Loading ...
Loading ...