Loading ...
Loading ...
Loading ...
H7 bulb, 55 watt
1. Switch off the lights and take the remote
control out of the ignition lock.
2. Low beam: open the folding cover in the
wheel arch, refer to page 251.
3. Remove the corresponding cover, refer to
page 251.
4. Unplug the connector from the bulb.
5. Slide the wire bracket sideways out of the
anchor, arrow 1, and fold down, arrow 2.
6. Remove the bulb.
7. Insert the new bulb.
8. Fold up the wire bracket and lock it.
9. Mount the connector.
10. Reattach the cover.
11. Low beam: attach the folding cover in the
wheel arch.
Parking and roadside parking lights
5-watt bulb, W5W
1.
Switch off the lights and take the remote
control out of the ignition lock.
2. Remove the high-beam cover, refer to
page 251.
3. Pull out the bulb socket, see arrow.
4. Pull off the bulb and replace it.
5. Insert the bulb socket.
6. Reattach the cover.
Xenon headlights
Xenon headlights
At a glance
1 Parking lights / daytime running lights
2 Low beams/high-beams/headlight flasher
3 Turn signal
Because of the long life of these bulbs, the
likelihood of failure is very low. Switching the
lights on and off frequently shortens their life.
Do not perform work/bulb replacement
on xenon headlamps
Have any work on the xenon lighting system,
including bulb replacement, performed only by
a service center.
Due to the high voltage present in the system,
there is the danger of fatal injuries if work is
carried out improperly.◀
Seite 252
Mobility Replacing components
252
Online Edition for Part no. 01 40 2 954 052 - II/15
Loading ...
Loading ...
Loading ...