Loading ...
Loading ...
Loading ...
Headlight setting
Changing the bulbs and lights may influence
the headlight settings. Have the headlight set‐
ting checked by a service center and corrected
if necessary after changing bulbs or lights.
Removing the headlight cover
The high-beam bulbs can be replaced via the
engine compartment, and the low beam and
turn signal bulbs can be replaced via a folding
cover in the wheel arch.
1 High-beam cover
2 Low beam cover
3 Turn signal bulb socket
To remove the covers:
▷ High-beams: fold out the bracket, arrow 4,
and take the cover out of the guide.
▷ Low beams: unscrew the cover, arrow 5.
Attach the covers carefully
When attaching the covers, proceed
carefully; otherwise, leaks may occur, causing
damage to the headlamp system.◀
Proceed in reverse order when attaching the
covers.
Access via the wheel arch
For low beams and turn signals only:
1.
Turn the wheel inward.
2. Open the folding cover in the wheel arch.
To open the locks, turn them counter‐
clockwise all the way using a coin, for ex‐
ample.
Halogen headlights
At a glance
1 High-beams/headlight flasher
2 Parking lights
3 Low beams
4 Turn signal
Low beams and high-beams
Wear protective goggles and gloves
Halogen bulbs are pressurized. There‐
fore, wear protective goggles and gloves. Oth‐
erwise, there is a danger of injuries if the bulb
is accidentally damaged during replacement.◀
The low beams and high-beams have separate
covers.
Seite 251
Replacing components Mobility
251
Online Edition for Part no. 01 40 2 954 052 - II/15
Loading ...
Loading ...
Loading ...