Loading ...
Loading ...
Loading ...
The partition net can be attached behind the
front or rear seats.
Before installing
1. Remove the pouch with the partition net
from the storage compartment under the
cargo floor panel in the cargo area.
2. Take the partition net out of the pouch, un‐
roll it, and unfold it.
After use, fold and roll up the partition net
in the same manner and place it in the
pouch so that it can be stowed back under
the cargo floor panel.
Ensure that hooks and tensioning buckles
do not rest on the rod elements.
3. Unfold the partition net to the point where
the rod elements engage.
Mounting eyes
Four mounting eyes are located on the back of
the rear seat backrests.
▷ Installation behind the front seats, ar‐
rows 1.
▷ Installation behind the rear seats, arrows 2.
Label
Ensure that the partition net is correctly posi‐
tioned, i.e., do not reverse front and back.
The partition net is labeled accordingly.
Installation behind the rear seats
1. If necessary, tilt the rear seat backrests for‐
ward and remove the front cargo cover, re‐
fer to page 120.
2. Fold open the cover caps 1 of the rear
brackets in the headliner to the point
where they engage.
3. Insert the rods of the partition net 2 all the
way into the holders on both sides and
slide forward.
4. Attach the hooks 1 at the bottom of the re‐
taining straps into the eyelets on the rear
seat backrest, arrow, on both sides.
5. Lash the partition net tightly. To do this,
tighten the retaining straps using the ten‐
sioning buckles.
Seite 122
Controls Interior equipment
122
Online Edition for Part no. 01 40 2 954 052 - II/15
Loading ...
Loading ...
Loading ...