Loading ...
Loading ...
Loading ...
When installing Genuine NISSAN floor mats,
follow the installation instructions provided with
the mat and the following:
1. Position the floor mat in the floorwell so that
the floor mat grommet holes are aligned with
the hook(s).
2. Secure the grommet holes into the hook(s)
and ensure that the floor mat is properly
positioned.
3. Make sure the floor mat does not interfere
with pedal operation. With the ignition in the
OFF position, the selector lever in the P (Park)
position (Automatic Transmission models) or
the shift lever in the N (Neutral) position
(Manual Transmission models) fully apply and
release all pedals. The floor mat must not
interfere with pedal operation or prevent the
pedal from returning to its normal position.
It is recommended that you visit a NISSAN dealer
for details about installing the floor mats in your
vehicle.
The illustration shows the location of floor mat
positioning hooks.
SEAT BELTS
The seat belts can be cleaned by wiping them
with a sponge dampened in a mild soap solution.
Allow the belts to dry completely in the shade
before using them.
For additional information, refer to “Seat belts” in
the “Safety—Seats, seat belts and supplemental
restraint system” section of this manual.
WARNING
Do not allow wet seat belts to roll up in
the retractor. NEVER use bleach, dye, or
chemical solvents to clean the seat belts,
since these materials may severely
weaken the seat belt webbing.
Positioning hooks
7-6 Appearance and care
Loading ...
Loading ...
Loading ...