Loading ...
Loading ...
Loading ...
in the process to correct a misspoken or
misinterpreted number.
• For phone numbers with more digits or spe-
cial characters, say “Special Number”, then
speak the digits. Up to 24 digits can be
entered. Available special characters are
“star”, “pound”, “plus” and “pause”. When
finished, say “Dial” to initiate the call. Say
“Correction” at any time in the process to
correct a misspoken or misinterpreted num-
ber or character.
• “Redial” — Speak this command to dial the
number of the last outgoing call. The system
will display “Redialing <name/number>”.
The name of the phonebook entry will be
displayed if it available, otherwise the number
being redialed will be displayed.
• “Call Back” — Speak this command to dial
the number of the last incoming call. The
system will display “Calling back <name/
number>”. The name of the phonebook entry
will be displayed if it available, otherwise the
number being called back will be displayed.
RECEIVING A CALL
When a call is received by the phone connected
to the vehicle’s Bluetooth® Hands-Free Phone
System, the call information is displayed on the
control panel display.
Press the
button to accept the call. Press
the
button to reject the call.
DURING A CALL
When a call is active, press the button to
access additional options. Speak one of the fol-
lowing commands.
• “Send” — Speak this command followed by the
digits to enter digits during the phone call.
• “Mute On” or “Mute Off” — Speak the command
to mute or unmute the system.
• “Transfer Call” — Speak this command to trans-
fer the call to the handset. To transfer the call
back from the handset to the Bluetooth®
Hands-Free Phone System, press the
button and confirm when prompted.
If supported by the phone, the Bluetooth®
Hands-Free Phone System allows for call waiting
functionality. If a call is received while another call
is already active, a message will be displayed on
the screen. Press the
button to hold the
active call and switch to the second call. Press
the
button to reject the second call.
While the second call is active, pressing the
button will allow the same commands that
are available during any calls as well as two
additional commands:
• “Switch Call” — Speak this command to hold
the second call and switch back to the original
call.
• “End Other Call”— Speak this command to stay
with the second call and end the original call.
Press the
button to accept the call. Press
the
button to reject the call.
ENDING A CALL
To end an active call, press the button.
4-70 Display screen, heater, air conditioner, audio and phone systems
Loading ...
Loading ...
Loading ...