Loading ...
Loading ...
Loading ...
33OPERATION
ENGLISH
Cycle Guide
= default setting
●
= allowable option
* = Energy Saver
Cycle Fabric Type Dry Level Temp
Time in
Min.
Wrinkle
Care
Damp Dry
Signal
SENSOR DRY
Normal*
Work clothes, corduroys,
etc.
Normal
Medium
Elec.: 57
Gas: 63
● ●
Adjustable
Heavy Duty Jeans, heavy-weight items
Normal
High 54 ● ●
Adjustable
Perm.Press
Permanent press, synthetic
items
Normal
Low 32 ● ●
Adjustable
Anti
Bacterial
Do not use this cycle with
delicate fabrics.
Very High 70 ●
Delicates Lingerie, sheets, blouses
Normal
Low 28 ● ●
Adjustable
MANUAL DRY
Speed Dry
For small loads with short
drying times
Auto
High
25 ●
Adjustable
Adjustable ●
Air Dry
For items that require heat-
free drying such as plastics
or rubber
Off No Heat
30 ●
Adjustable ●
Sensor Dry Cycles
Sensor Dry cycles utilize LG’s unique dual sensor
system to detect and compare the moisture level
in clothes and in the air and adjust the drying time
as needed to ensure superior results. The dryer
automatically sets the dryness level and temperature
at the recommended setting for each cycle. The
estimated time remaining will be shown in the display.
Manual Dry Cycles
Use Manual Dry cycles to select a specic amount of
drying time and a drying temperature. When a Manual
Dry cycle is selected, the Estimated Time Remaining
display shows the actual time remaining in your
cycle. You can change the actual time in the cycle by
pressing the More Time or Less Time buttons.
NOTE
• To protect your garments not every dryness level,
temperature, or option is available with every cycle.
See the Cycle Guide for details.
• The Energy Saver option is turned on by default in
the Normal Cycle. Turn off the Energy Saver option
for a faster Normal cycle which begins with heated
drying. To turn the Energy Saver default off, press
and hold the Wrinkle Care button for three seconds.
ON or OFF appears in the display.
NSF International (formerly the National Sanitation
Foundation), certies that the ANTI-BACTERIAL cycle
reduces 99.9% of bacteria on laundry, and none of
the bacteria will carry over onto the next laundry load.
• The default settings for the ANTI-BACTERIAL cycle
are HIGH temperature and VERY DRY. These
default settings cannot be changed.
• Do NOT use this cycle with delicate items or fabrics.
Cycle Modier Buttons
Sensor Dry cycles have preset settings that are
selected automatically. Manual Dry cycles have
default settings, but you may also customize the
settings using the cycle modier buttons. Press
the button for that option to view and select other
settings.
Dry Level
Use this button to select the level of dryness for the
cycle. Press the Dry Level button repeatedly to scroll
through available settings.
• This option is only available with Sensor Dry cycles.
• The dryer will automatically adjust the cycle time.
Selecting More Dry or Very Dry will increase
the cycle time, while Less Dry or Damp Dry will
decrease the cycle time.
• Use a Less Dry or Damp Dry setting for items that
you wish to iron.
Temp.
Use this button to adjust the temperature setting.
This allows precise care of fabrics and garments.
Press the Temp. button repeatedly to scroll through
available settings.
Time Dry
Use this button to manually select the drying time,
from 20 to 60 minutes, in 10-minute increments. Use
this for small loads or to remove wrinkles. Use the
More Time/Less Time buttons to add or reduce the
drying time in 1-minute increments.
Signal
Use this button to adjust the volume of or turn off
the button tones and end of cycle melody. Press the
button repeatedly until the desired volume setting is
illuminated.
Option Buttons
The dryer features several additional cycle options to
customize cycles to meet individual needs. Certain
option buttons also feature a special function that
can be activated by pressing and holding that option
button for 3 seconds.
Adding Cycle Options to a Cycle
1
Turn on the dryer and press the Cycle buttons to
select the desired cycle.
2
Use the cycle modier buttons to adjust the
settings for that cycle.
3
Press the cycle option button(s) to add the
desired options. A conrmation message is
shown in the display.
4
Press the START/PAUSE button to start the
cycle. The dryer starts automatically.
Energy Saver (On Some Models)
This option helps to reduce the energy consumption
of the Normal Cycle, depending on the load size.
When the Energy Saver option is selected, the cycle
begins with an air dry section and the drying time is
increased.
Default On/Off
This option allows the Energy Saver settings to be
changed.
To run a Normal cycle without the Energy Saver
option, press and hold the Energy Saver button for
three seconds. ON or OFF appears in the display.
Wrinkle Care
Selecting this option will tumble the load periodically
for up to 3 hours after the selected cycle, or until the
door is opened. This is helpful in preventing wrinkles
when you are unable to remove items from the dryer
immediately.
Damp Dry Signal
When this option is selected, the dryer signals when
the load is approximately 80% dry. This allows you
to remove faster-drying lightweight items or items
that you would like to iron or hang while they are still
slightly damp.
Loading ...
Loading ...
Loading ...